Setting the power on mode
This function sets the input mode and the sound volume at the time the power is switched on.
Example: Setting the input mode to “VIDEO2”
On “OPTION3 ” menu, select “PWR.ON MODE ”, then press the MENU/ENTER button.
The “PWR.ON MODE ” screen appears.
On “INPUT ” of “PWR.ON MODE ” menu, select “VIDEO2”.
The available inputs depend on the setting of input.
PWR . ON MODE
INPUT |
| : | VIDEO2 |
VOLUME |
| : | LAST |
|
|
|
|
SEL. | ADJ. |
| EXIT RETURN |
Information
⬛INPUT settings
LAST: Last mode (the input that was last selected at the time the power was switched off).
VIDEO1, 2, 3: VIDEO input mode.
RGB1, 2, 3: RGB input mode.
HD/DVD1, 2: HD/DVD input mode.
HD/DVD2, 3: DVD input mode.
MULTI: Multi screen mode.
Follow the procedure used for PROGRAM TIMER. See page
PICTURE IN PICTURE | SIDE BY SIDE | ||||
PWR . ON MODE | PWR . ON MODE | ||||
MULTI SCREEN SETTING | MULTI SCREEN SETTING | ||||
MULTI MODE |
|
| MULTI MODE |
|
|
: BOTTOM LEFT |
|
| : SIDE BY SIDE1 |
|
|
INPUT MODE |
|
| INPUT MODE |
|
|
MAIN | : | HD/DVD1 | LEFT | : | HD/DVD1 |
SUB | : | VIDEO1 | RIGHT | : | VIDEO1 |
SEL. ADJ. |
| EXIT RETURN | SEL. ADJ. |
| EXIT RETURN |
⬛VOLUME settings
LAST: Last mode (the volume that was last selected at the time the power was switched off).
0 to 44: The level of sound volume.
Enabling/disabling the front panel controls
This function enables/disables the front panel controls.
Example: Setting “ON”
On “CONTROL LOCK” of “OPTION3” menu, select “ON”, then press the MENU/ENTER button.
OPTION 3 | 3 / 4 | |
PREVIOUS PAGE |
|
|
TIMER |
|
|
PWR . ON MODE |
|
|
CONTROL LOCK | : | ON |
IR REMOTE | : | ON |
LOOP OUT | : | OFF |
REMOTE ID | : | ALL |
ID NUMBER | : | ALL |
VIDEO WALL
NEXT PAGE
SEL. | ADJ. | EXIT RETURN |
Information
⬛CONTROL LOCK settings
ON: Disables the buttons on the front panel.
OFF: Enables the buttons on the front panel.
*Even when the CONTROL LOCK is set, the POWER switch will not be locked.
*This becomes effective when the
Downloaded From
Enabling/disabling remote control wireless transmission
This function enables/disables remote control wireless transmission.
Example: Setting “OFF”
On “IR REMOTE” of “OPTION3” menu, select “OFF”, then press the MENU/ENTER button.
OPTION 3 | 3 / 4 | |
PREVIOUS PAGE |
|
|
TIMER |
|
|
PWR . ON MODE |
|
|
CONTROL LOCK | : | OFF |
IR REMOTE | : | OFF |
LOOP OUT | : | OFF |
REMOTE ID | : | ALL |
ID NUMBER | : | ALL |
VIDEO WALL
NEXT PAGE
SEL. | ADJ. | EXIT RETURN |
Information
⬛IR REMOTE settings
ON: Enables remote control wireless transmission.
OFF: Disables remote control wireless transmission. Set “OFF” to avoid unwanted control from other remote controls.
Loop Out setting
When this feature is set to ON, the received signal will be looped out.
Example: Setting “ON”
On “LOOP OUT” of “OPTION3” menu, select “ON”.
OPTION 3 | 3 / 4 | |
PREVIOUS PAGE |
|
|
TIMER |
|
|
PWR . ON MODE |
|
|
CONTROL LOCK | : | OFF |
IR REMOTE | : | ON |
LOOP OUT | : | ON |
REMOTE ID | : | ALL |
ID NUMBER | : | ALL |
VIDEO WALL
NEXT PAGE
SEL. | ADJ. | EXIT RETURN |
Information
⬛LOOP OUT settings
ON: The received signal will be looped out via PC1 terminal or VIDEO1 terminal.
OFF: The received signal will not loop out.
*Even if LOOP OUT is ON, signals won’t be sent out if POWER is being turned off.
⬛To connect another display...
See page
⬛If the RGB/PC1 signal is present at the time the power switched on...
The RGB/PC1 input will be displayed regardless of the setting of LOOP OUT.
REMOTE ID setting
Set the remote code to adapt the plasma monitor to the remote control.
Example: Setting to “1”
On the “REMOTE ID” of “OPTION3” menu, select “1”.
|
| OPTION 3 | 3 / 4 | |
| PREVIOUS PAGE |
|
| |
| TIMER |
|
|
|
| PWR . ON MODE |
|
| |
| CONTROL LOCK | : | OFF | |
| IR REMOTE |
| : | ON |
| LOOP OUT |
| : | OFF |
| REMOTE ID |
| : | 1 |
| ID NUMBER |
| : | ALL |
| VIDEO WALL |
|
| |
NEXT PAGE |
|
| ||
SEL. | ADJ. |
| EXIT RETURN | |