NEC PX-42XM4G, PX-61XM4G Using the remote control, Battery Installation and Replacement, 7m/23ft

Caution when placing the plasma monitor in portrait mode				Top side
•	Use the optional unit. Contact your store of purchase when installing.
			OPTION1
			OSM
•	Rotate 90° clockwise as seen from the front when installing.		RGB SELECT: RGB
			BNC INPUT
			:	RGB
		90°	D - SUB INPUT
•	After installing, make sure the NEC logo is located at the		:	AUTO
			ALL RESET:	OFF
			HD SELECT
			:	1080B
			INPUT SKIP
	left hand side of the screen when facing the plasma from		:	OFF
				1024×768
			SEL. MENU/ENTER OK
				EXIT RETURN
	the front.

•Be sure to set “OSM ANGLE” to “V” when using.

*Failure to heed the above cautions may lead to malfunction.

Using the remote control

Battery Installation and Replacement

Insert the 2 “AAA” batteries, making sure to set them in			Bottom side
with the proper polarity.
1. Press and open the cover.	Operating Range
	* Use the remote control within a distance of about 7 m/
		23ft. from the front of the monitor’s remote control sensor
		and at horizontal and vertical angles of up to approximately
	30°.
	* The remote control operation may not function if the
		monitor’s remote control sensor is exposed to direct
2. Align the batteries according to the (+) and (–) indication		sunlight or strong artificial light, or if there is an obstacle
		between the sensor and the remote control.
inside the case.

Approx.

7m/23ft

3.Replace the cover.

Using the wired remote control mode

Connect the remote cable* to the remote control’s remote jack and the “REMOTE IN” terminal on the monitor. When the cable is connected, the mode automatically switches to wired remote control. When the wired remote control mode is used, the remote control can be operated even if no batteries are loaded.

External Control

I N

REMOTE

OUT

Remote Control

Cable*

To Remote Jack

Handling the remote control

•Do not drop or mishandle the remote control.

•Do not get the remote control wet. If the remote control gets wet, wipe it dry immediately.

•Avoid heat and humidity.

•When not using the remote control for a long period, remove the batteries.

•Do not use new and old batteries together, or use different types together.

•Do not take apart the batteries, heat them, or throw them into a fire.

•When using the remote control in the wireless condition, be sure to unplug the remote cable from the REMOTE IN terminal on the monitor.

Downloaded From TV-Manual.com Manuals		En-7
	* The 1/8 Stereo Mini cable must be purchased separately.