NEC PX-42XM4G, PX-61XM4G, PX-50XM5G user manual Specifications

Specifications

⬛ 42XM4

Screen Size			922(H)×515(V) mm
			36.3"(H)×20.3"(V) inches
			diagonal 42"
Aspect Ratio			16 : 9
Resolution			1024(H)×768(V) pixels
Pixel Pitch			0.9(H)×0.671(V) mm
			0.036"(H)×0.027"(V) inches
Color Processing			4,096 steps, 68.7 billion colors
Signals
	Synchronization Range		Horizontal : 15.5 to 110.0 kHz
			(automatic : step scan)
			Vertical : 50.0 to 120.0 Hz
			(automatic : step scan)
		Input Signals	RGB, NTSC (3.58/4.43), PAL (B,G,M,N),
			PAL60, SECAM, HD*1 , DVD*1 , DTV*1
Input Terminals (VIDEO1 and RGB1 can also be used as OUTPUT terminals)
	RGB
		Visual 1 (Analog)	mini D-sub 15-pin×1
		Visual 2 (Analog)	BNC (R, G, B, HD, DV)×1*2
		Visual 3 (Digital)	DVI-D 24-pin×1*3
		Video
		Visual 1	BNC×1
		Visual 2	RCA-pin×1
		Visual 3	S-Video: DIN 4-pin×1
		DVD/HD
		Visual 1	RCA-pin (Y, Cb/Pb, Cr/Pr)×1*1
		Visual 2	BNC (Y, Cb/Pb, Cr/Pr)×1*1, *2
		Visual 3	DVI-D 24-pin×1*3
		Audio	Stereo RCA×3(Selectable)
	External Control		D-sub 9-pin×1(RS-232C)
Sound output			8W+8W at 6 ohm
Power Supply			AC100-240V 50/60Hz
Current Rating			4.5A (maximum)
Power Consumption			285W (typical)
Dimensions			1022 (W)×610 (H)×98(D) mm
			40.2 (W)×24 (H)×3.9 (D) inches
Weight			30 kg / 66 lbs (without stand)
Environmental Considerations
	Operating Temperature		0°C to 40°C / 32°F to 104°F
		Humidity	20 to 80% (no condensation)
		Altitude	720 to 1114 hPa
	Storage Temperature		(0 to 2800 m / 0 to 9180 feet)
			-10°C to 50°C / 14°F to 122°F
		Humidity	10 to 90% (no condensation)
		Altitude	700 to 1114 hPa
			(0 to 3000 m / 0 to 9840 feet)

Other Features Motion compensated 3D Scan Converter (NTSC, PAL, 480I, 576I, 525I, 625I, 1035I, 1080I), 2-3 pull down Converter (NTSC, 480I, 525I, 1035I, 1080I (60Hz)), 2-2 pull down Converter (PAL, 576I, 625I, NTSC, 480I, 525I), Digital Zoom Function (100-900% Selectable), Video Wall 4-25 multi screen, Self Diagnosis, Image Burn reduction tools (PLE LOCK1~3, INVERSE, WHITE, ORBITER (Auto1,2/Manual), SCREEN WIPER), Color Temperature select (high/mid/mid low/low, user has 4 memories), Control lock (Except power SW), Auto Picture, Input Skip, Color Tune, Low Tone (3 mode), Auto ID, Programmable Timer, Gamma Correction (4 mode), Loop through interface, Plug and play (DDC1, DDC2b, RGB3: DDC2b only),

Split screen operations

Regulations IEC60950-1, EN60950-1,

EN55022 class B, EN55024,

EN61000-3-2, EN61000-3-3,

AS/NZS CISPR22 class B

	40.4	57.6
1022 (40.2")	(1.59")
		(2.31")
922 (36.3")
515 (20.3")	610 (24")
		98
		(3.9")
	Units are in mm
		(inch)

The features and specifications may be subject to change without notice.

*1 HD/DVD/DTV input signals supported on this system.

480P (60 Hz)	480I (60 Hz)	525P (60 Hz)
525I (60 Hz)	576P (50 Hz)	576I (50 Hz)
625P (50 Hz)	625I (50 Hz)	720P (60 Hz)
720P (50 Hz)	1035I (60 Hz)	1080I (50 Hz)
1080I (60 Hz)	1080P (50 Hz)	1080P (60 Hz)

*2 The 5-BNC connectors are used as RGB/PC2 and HD/DVD2 input. Select one of them under “BNC INPUT”.

*3 Compatible with HDCP. Supported Signals

• 640×480P @ 59.94/60Hz	• 1920×1080I @ 50Hz
• 1280×720P @ 59.94/60Hz	• 720×576P @ 50Hz
• 1920×1080I @ 59.94/60Hz	• 1280×720P @ 50Hz
• 720×480P @ 59.94/60Hz

Note: In some cases a signal on the plasma monitor may not be displayed properly. The problem may be an inconsistency with standards from the source equipment (DVD, Set-top box, etc...). If you do experience such a problem please contact your dealer and also the manufacturer of the source equipment.

Downloaded From TV-Manual.com Manuals En-43