GLOBAL ADMINISTRATOR SECTION CHAPTER 1: SYSTEM SCREEN

Specify LAN Settings

1.In the Host Name field, enter up to 50 alphanumeric characters for the name of the host for this server, such as pba.LOGO.com.

2.Specify the following information, as necessary:

In the LAN1 IP field of the IP/Mask Setting frame, the default LAN 1 IP address is 1.2.3.3. Enter the IP address and select the corresponding subnet mask of the LAN1 network interface card to be used on the network.

In the LAN2 IP field, the default LAN 2 IP address is 1.2.3.4. Enter the IP address and select the corre- sponding subnet mask of the LAN2 network interface card to be used on the network.

TIP: Be sure to place the LAN1 and LAN2 IP addresses in different subnets.

In the Primary IP field of the DNS frame, the default IP address is 4.2.2.1. Enter the IP address of the first DNS server to be used for resolving the IP address of the authentication server with the machine name of that server.

In the Secondary IP field of the DNS frame, the default IP address is 4.2.2.2. Enter the IP address of the second DNS server to be used for resolving the IP address of the authentication server with the machine name of that server.

In the Gateway IP field of the Gateway frame, the default IP address is 1.2.3.1. Enter the IP address of the default router to be used for the entire network segment.

3.Click Apply to apply your settings.

NOTE: Whenever modifications are made in this window, the server must be restarted in order for the changes to take effect.

74

8E6 TECHNOLOGIES, PROXYBLOCKER USER GUIDE

Page 88
Image 88
8e6 Technologies ProxyBlocker manual Specify LAN Settings