GLOBAL ADMINISTRATOR SECTION CHAPTER 1: SYSTEM SCREEN

Modify the NIC Mode Setting

WARNING: If changing the NIC mode, be sure the hub/switch to which the ProxyBlocker is connected will support the selected NIC mode. An incorrect setting may prevent you from accessing the ProxyBlocker console.

To modify the NIC setting, in the LAN1 or LAN2 frame:

1.Click the radio button for the available option you wish to select: 10baseT-Full Duplex, 10baseT-Half Duplex, 100baseT- Full Duplex, 100baseT-Half Duplex, or 1000baseT-Full Duplex, if available on your Proxy- Blocker model (see NIC Mode Speeds Chart).

2.Click Apply to activate the new NIC mode setting.

NOTE: The status (Up or Down) of the Interface displays to the right of the LAN1 and LAN2 labels. For an Interface with an “Up” status, the Link status (Up or Down) displays to the right of the Interface status.

8E6 TECHNOLOGIES, PROXYBLOCKER USER GUIDE

139

Page 153
Image 153
8e6 Technologies ProxyBlocker manual Modify the NIC Mode Setting