GLOBAL ADMINISTRATOR SECTION CHAPTER 1: SYSTEM SCREEN

Specify Network Time Protocol Servers

In the Details frame, three NTP server IP addresses display by default in the Servers list box. These IP addresses are: 128.59.35.142, 142.3.100.15, and 129.132.98.11.

NOTE: Any IP address following the first entry in the Servers list box is only used in the event that the ProxyBlocker cannot access the primary time NTP server specified. IP addresses are used in the order in which they display in the list box.

Add an NTP Server

To add an NTP server:

1.Enter the IP address in the NTP Server field.

2.Click Add to include this IP address in the Servers list box.

3.Click Apply to apply your settings.

Remove an NTP Server

To remove an NTP server:

1.Select the IP address from the Servers list box.

2.Click Delete.

3.Click Apply to apply your settings.

WARNING: If using the ProxyBlocker with the 8e6 Technologies Enterprise Reporter unit, be sure the ER unit is connected to the same NTP servers as the ProxyBlocker.

76

8E6 TECHNOLOGIES, PROXYBLOCKER USER GUIDE

Page 90
Image 90
8e6 Technologies ProxyBlocker manual Specify Network Time Protocol Servers, Add an NTP Server, Remove an NTP Server