8e6 Technologies ProxyBlocker Getting Started, Initial Setup, Using the Administrator Console

INTRODUCTORY SECTION CHAPTER 3: GETTING STARTED

Chapter 3: Getting Started

Initial Setup

To initially set up your ProxyBlocker server, follow the instructions in the Quick Start Guide, the booklet packaged with your ProxyBlocker unit. This guide explains how to perform the initial configuration of the server so that it can be accessed via an IP address on your network.

NOTE: If you do not have the ProxyBlocker Quick Start Guide, contact 8e6 Technologies immediately to have a copy sent to you.

Using the Administrator Console

Log On

1.Launch a browser window supported by the Proxy- Blocker.

2.In the address line of the browser window, type in the ProxyBlocker server’s IP address appended by the following port number:

•“:88” for an HTTP address

•“:1443” for an HTTPS address

For example, if your IP address is 210.10.131.34, type in

http://210.10.131.34:88 or https://210.10.131.34:1443.

3. Click Go to open the ProxyBlocker Introductory Window:

8E6 TECHNOLOGIES, PROXYBLOCKER USER GUIDE 31