3M user manual Operating QUESTempº 44/46, View, Setup

Page 15

10

Operating

Operating QUESTempº 44/46

View

Operating QUESTempº 44/46

Use the Up Arrow and Down Arrow keys to move the marker in the display in front of the desired mode. Pressing the I/O Enter key will select the mode.

View

Displays the measured data but does not log it. If more than one set of sensors is plugged into the unit, they can be displayed by pressing and releasing the I/O ENTER key. The displayed sensor set is shown in the upper right corner.

WET

65.5º F

DRY

74.0º F

View mode

1 Indicates you are viewing sensor one data

Figure 1-6: Viewing measured data

NOTE: To return to the menu, hold down the I/ O ENTER key while a 3, 2, 1 countdown is shown in the lower right corner of the display. Then the menu screen will appear (see Figure 1-3, page 4 for an example).

Setup

Allows changing temperature units, language, time, date, logging rate, selecting between Heat Index and Humidex, turning air flow on or off, and setting stay time parameters.

To Setup parameters do one of the following:

1.From the main menu, select Setup by pressing the I/O Enter key.

2.Use the Arrow keys to select an item (listed below).

•Temperature: Celsius, Fahrenheit.

•Language: English, Spanish, French, Italian, German.

•Time: 24 hour clock only.

•Date: Day-month-year format.

•Log Rate: 1, 2, 5, 10, 15, 30, 60 minutes.

•Heat Index (United States), Humidex (Canada)

•Flow: On (QTº46 only), Off with fixed rate. (0.3 m/s is the recommended value for indoor applications and 2.0 m/s for outdoor applications)

Page 14 Page 16
Image 15
Page 14 Page 16
Contents
Market Leader Contents Displayed Items Iii List of Tables List of FiguresQUESTempº Models IntroductionGetting Started Up and Running overviewKeypad Operation Run Stop key Enter keyUp Arrow key Down Arrow keyPlacing the QUESTempº 44/46 on the job site Turning on/off and basic operationWaterless Wetbulb Sensor and Relative Humidity Sensor SensorsAbout the sensor bar Globe ThermometerRemote, Sensors 2 Tri-sensor weighted average Computing Waterless wetbulb and wind speed Waterless WetbulbAirflow WetBulb Globe TemperatureStay Times/Rest Times QTº46 only Heat Index/HumidexThermal Comfort Setup Operating QUESTempº 44/46View Index Setting Notes Setup for Waterless Wetbulb measurement airflow rateReset PrintRun Flow 0.3m/s  Displayed ItemsStay Time DateData Logging Data LoggingPerforming an electronic sensor check Electronic sensor checkRH Sensor Alignment Sensor AlignmentLow RH Alignment screen Adjust % to 33% using up/down arrow Printing PrintingPrintingSerial Heat Stress Report ParallelAirflow Functionality Airflow functionalityBatteries for Air Probe Operational CheckOperating sequence Data Logging AirflowPower options Volt Alkaline Battery ReplacementApproved 9-Volt Batteries 29 NiMH rechargeable battery NiMH Battery PackAppendix a Appendix a SpecificationsCharge Time NiMH Battery Pack Appendix B Appendix B Heat Exposure TablesUnited States Navy Acgih Clothing CorrectionsUnited States Navy Flag Conditions for U.S. Navy/Marine Corp. Ashore Electrical power research institute EpriAppendix C Accessories Air Probe AccessoriesAppendix C Appendix D Communication setupAppendix D 3MTM Detection Management Software DMS QUESTempo 44/4631 QT⁰44/46 downloading data 32 Downloading QT⁰44/46 files Downloading data with the QT⁰44/46Charts and Graphs in Panel layout view PLV Viewing Data in DMSSelecting a session/study 34 QT⁰44/46 data in panel layout view Remember setting Reports and Printing Inserting on-site testing imagesCalibration 3M ServiceWarranty Service Department and Technical Support 1 800About Us About 3M Personal Safety
Top Page Image Contents