Contents
i Contents
Contents |
|
Introduction | 1 |
QUESTempº Models | 1 |
Getting Started | 2 |
Up and Running overview | 2 |
Keypad Operation | 2 |
I/O Enter key………………………………………………………………………………………………………...3 | |
Up Arrow key………………………………………………………………………………………………………..3 | |
Down Arrow key…………………………………………………………………………………………………….3 | |
Run Stop key………………………………………………………………………………………………………..3 | |
Escaping or moving back one screen…………………………………………………………………………… 3 | |
Turning on/off and basic operation | 4 |
Placing the QUESTempº 44/46 on the job site | 4 |
Sensors | 5 |
About the sensor bar | 5 |
Globe Thermometer | 5 |
Waterless Wetbulb Sensor and Relative Humidity Sensor | 5 |
Dry Bulb Thermometer | 5 |
Remote, Sensors 2 and 3 | 6 |
6 | |
Measurements | 7 |
Waterless Wetbulb | 7 |
Computing Waterless wetbulb and wind speed | 7 |
WetBulb Globe Temperature | 8 |
Stay Times/Rest Times (QTº46 only) | 8 |
Heat Index/Humidex | 8 |
Airflow | 8 |
Thermal Comfort | 9 |
Operating QUESTempº 44/46 | 10 |
View | 10 |
Setup | 10 |
Setup for Waterless Wetbulb measurement (airflow rate) | 11 |