3 BASIC OPERATION
■Optional voice scrambler operation
Activating the scrambler | Programming scrambler codes |
The optional voice scrambler provides private communica- tions. In order to receive or send scrambled transmissions you must first activate the scrambler function. To activate the function, an optional
The scrambler function automatically turns OFF when channel 16 or 70 is selected.
qSelect an operating channel other than channel 16 and 70. w While pushing [HI/LO], push [LO/DX•IC/SCR] to toggle an
optional scrambler function ON or OFF.
•“SC” appears.
eTo turn the scrambler function OFF, repeat step w.
• “SC” disappears.
There are 128 or 32 codes (0 to 127 or 1 to 32) available for programming when the optional
qTurn power OFF.
wWhile pushing [16•9], turn power ON to enter set mode. e After the display appears, release [16•9].
r Push [16•9] one or more times to select the scrambler code item.
•“Scrambler code” appears.
tRotate the channel selector to select the desired scram-
bler code.
yTurn power OFF, then ON again to exit set mode.
[Example]: Programming scrambler code 127.
16 9 + POWER | SetÊmode | 16 9 | SetÊmode | SetÊmode |
Enter set mode | Beep | Push one or | Scrambler | Scrambler |
|
| more times. | code | Select code code |
|
|
| ||
| Set mode |
| Scrambler code item |
|
10