13
■Intercom operation
■Channel names
qPush [LO/DX•IC] for 1 sec. to ac- tivate the intercom function.
•“IC” appears in the priority channel readout.
•The channel name disappears. w Push [PTT] to talk.
•“ ” appears in the channel name indicator.
Appears when the inter- com function is in use.
qPush [Y]/[Z] to select a channel to program.
•Push [CH/WX•U/I/C] several times while pushing [H/L] to select the channel group (USA, INT, CAN), if desired.
w While pushing [H/L], push [16•9]. |
• The 1st character of the currently programmed comment flashes. |
e Push [Y]/[Z] to select a character. |
r Push [SQL] to move to right; then push [Y]/[Z] to select a |
character. |
eRelease [PTT] to listen.
•“ ” appears in the channel name indicator when the trans- ceiver is in talking.
rPush [LO/DX•IC] to cancel the intercom function.
•Pushing [16], [SCN•TAG] or [CH/WX] is also cancels the inter- com function.
For your reference:
In case the intercom mode is selected with the transceiver during microphone power OFF, the microphone power is au- tomatically turned ON and the intercom mode is selected.
Intercom beep function
➥Push [LO/DX•IC] for more than 1 sec.
•Emits intercom beep while holding.
• Push [VOL] to move to the left. |
tContinue until the desired characters have been selected, the push [16•9] to return to normal operation.
• Available characters
(space) | (!) | (") | (#) | ($) | (%) | (&) | (’) | (( ) | ( )) |
|
|
|
|
|
|
|
|
|
|
(✱) | (+) | (,) | (.) | (/) | (0) | (1) | (2) | (3) | |
|
|
|
|
|
|
|
|
|
|
(4) | (5) | (6) | (7) | (8) | (9) | (A) | (B) | (C) | (D) |
|
|
|
|
|
|
|
|
|
|
(E) | (F) | (G) | (H) | (I) | (J) | (K) | (L) | (M) | (N) |
|
|
|
|
|
|
|
|
|
|
(O) | (P) | (Q) | (R) | (S) | (T) | (U) | (V) | (W) | (X) |
|
|
|
|
|
|
|
|
|
|
(Y) | (Z) | (a) | (b) | (c) | (d) | (e) | (f) | (g) | (h) |
|
|
|
|
|
|
|
|
|
|
(i) | (j) | (k) | (l) | (m) | (n) | (o) | (p) | (q) | (r) |
|
|
|
|
|
|
|
|
|
|
(s) | (t) | (u) | (v) | (w) | (x) | (y) | (z) |
|
|
|
|
|
|
|
|
|
|
|
|
56