Icom IC-M502 Entering set mode, Turn power OFF While pushing 169, turn power on, Beep toneBEEP

Page 59

■Set mode programming

Set mode is used to change the condition of the transceiver’s functions and the microphone’s own functions:

Transceiver’s functions—

scan mode (normal or priority), scan resume timer, weather alert, dualwatch/tri-watch selection, DSC watch, transceiver’s beep tone, internal speaker (transceiver), LCD contrast (transceiver), RF attenuation level, scrambler code and scrambler type.

Microphone’s own functions—

beep tone function (microphone) and LCD contrast (micro- phone).

In this section, instructions are for the microphone’s own func- tions only. Refer pgs. 30–33 for the setting of the other func- tions. (Some functions may not be selected from the micro- phone.)

Entering set mode

qTurn power OFF.

wWhile pushing [16•9], turn power ON.

•After beep emission, a set mode item (in the channel name indi- cator and condition in the channel number readout) is displayed.

HM-127 REMOTE-CONTROL MICROPHONE 13

• Beep tone“BEEP”

➥Push [Y] to turn ON, [Z] to turn OFF the beep output.

Push

•LCD contrast“LCD CONTRAST”

➥Push [Y]/[Z] to adjust to a suitable LCD contrast.

• • Push

• •

ePush [16•9] to select the desired item, if necessary. r Push [Y]/[Z] to select the desired condition of the item.

t Turn power OFF, then ON to exit set mode.	55

Image 59

Contents IM502 Channel 16 is automatically selected Case of EmergencyTable of Contents Page OPERATOR’S License Operating RulesRadio license for boaters U.S.A. only Ship Station LicenseChannel Selector Channel Transmit Power Switch HI/LOPanel Description Panel description1DSC/POSITION Switch DSC/ENTPOS Function display Microphone PTT Switch PTTChannel UP/DOWN Switches Y/Z Same as the HI/LO switch on the front panel. pChannel 9 Call channel Basic OperationChannel selection ChannelPush once CH/WX Microphone lock functionWeather channels Canadian channelsNecessary Push HI/LO to select the output power if necessaryReceiving and transmitting Push LO/DX to turn the receive attenuator on or OFF if25W TAG äLEASURE Call channel programmingChannel names Optional scrambler function on or OFF Set mode Scrambler code itemOptional voice scrambler operation Activating the scrambler Programming scrambler codesCall channel Description OperationDUALWATCH/TRI-WATCH Simulation Normal Scan Scan OperationsScan types Priority ScanScan starts Setting tag channels Starting a scanClearing all tag channels in the selected channel group LATÊÊÊÊ Lonêêêêê DSC OperationMmsi code programming Position and time programmingLATÊ3434N LON13534E Position indicationInputÊtime UTCÊÊDistress Completed WaitÊforÊACK Distress callDistressÊÊTX LATÊ3523N LON13535E GPSÊUTC1234DSC/ENT Transmitting DSC callsTransmitting individual call Êindvêack˘INDVÊACK Transmitting individual acknowledgementAll ships call has been transmitted Transmitting all ships call˘AllÊships Push DSC/ENT to transmit the all ships callPosêreq Transmitting position request callTransmitting position reply call Push Distress for 5 sec. to transmit the distress call Setting the distress informationSelÊitem ÊRCVÊcalls ˘DTRSÊset ÊSet-up SelÊnature ÊUndesign ˘Explosion ÊFloodingName DSC individual IDProgramming address ID Deleting address IDReceiving a distress acknowledgement Receiving DSC callsReceiving a distress call Receiving an individual call Receiving a distress relay acknowledgementReceiving a distress relay call Receiving an all ships callÊtom Receiving a geographical area callReceiving a position reply call Receiving a position request callOffsetÊtime 0000 1200 DSC set modeOffset time Set-up ÊAddÊID ÊDeleteÊID ˘OffsetÊtimeMMSIÊcheck 123456789 Mmsi code checkSet-up ÊDeleteÊID ÊOffsetÊtime ˘MMSIÊcheck Check the 9-digit Mmsi DSC self ID codeToÊclear ThisÊdata NoÊDSC/ENT YesÊH/L Receive messagesSelÊitem ˘RCVÊcalls ÊDTRSÊset ÊSet-up SelÊMessage ˘Distress ÊOtherTalk Intercom OperationIntercom operation IntercomPush 16 SET ModeSet mode programming SET Mode ConstructionWeather alert Set mode itemsScan mode Scan resume timerInternal speaker DSC watchBeep tone Scrambler type LCD contrastAttenuation level Scrambler codeCleaning Connections and MaintenanceSupplied accessories Fuse replacementMicrophone Hanger ConnectionsOverhead Mounting Mounting on Dashboard Using the supplied mounting bracketMounting the transceiver Attach the clamps on either side of the IC-M502 Using the optional mounting bracketOptional unit installation Dimensions Problem Possible Cause Solution TroubleshootingChannel List † Low power only Receive onlyTransmitter Specifications and OptionsSpeciﬁcations GeneralOptions Push and hold to transmit release to receive Power Switch PWR pgsPTT Switch PTT pgs HM-127 REMOTE-CONTROL Microphone0SCAN Switch SCNTAGpgs SQUELCH/MONITOR/LOCK Switch SqlmonilVOLUME/DIMMER Switch Voldim Transmit Power Switch H/L0PRIORITY Channel Indicator HM-127 supplied accessories Installation is finished when it is completed InstallationMm 3⁄32˝ 24 to 27 d mm 15⁄16 to 11⁄16˝ Mm 29⁄32˝ Gasket Condition before selecting the Push Weather channel group Channel A., International and Canadian channelsCall channel Push CH/WX to select regular channelPush LO/DX to turn the RF Attenuator function on and OFF Push H/L to select the output power, if necessaryRF attenuator function Activating the lock function Lock functionsDisplay backlighting Monitor functionTo turn the scrambler func Tion OFF, repeat step w Activating the scramblerProgramming scramble codes Push Y/Z to select the desired channelDualwatch/Tri- watch operation Setting tag channelsBeep toneBEEP Entering set modeTurn power OFF While pushing 169, turn power on Available characters Intercom operation Channel namesIntercom beep function R11 Mm 3⁄32˝ TemplateCut here 149 57⁄˝Kamiminami, Hirano-ku, Osaka 547-0003 Japan