Icom VHF MARINE TRANSCEIVER, IC-M502 Set mode programming, SET Mode Construction, Push 16

Page 34

8 SET MODE

■Set mode programming

Set mode is used to change the conditions of the trans- ceiver’s functions: scan mode (normal or priority), scan re- sume timer, weather alert, dualwatch/tri-watch selection, DSC watch, transceiver’s beep tone, internal speaker (transceiver or HM-127), LCD contrast (transceiver or HM-127), RF atten- uation level, scrambler code and scrambler type.

•Available functions may differ depending on dealer set-

ting.

•The optional HM-127 has it’s own settings for the beep tone and LCD contrast.

qTurn power OFF.

wWhile pushing [16•9], turn power ON to enter set mode. e After the display appears, release [16•9].

r Push [16•9] to select the desired item, if necessary.

t Rotate the channel selector to select the desired condition of the item. Use [Y]/[Z] when using an optional HM-127.

y Turn power OFF, then ON again to exit set mode.

• SET MODE CONSTRUCTION

Scan mode	Scan resume timer	Weather alert	Dual/tri watch	DSC watch
Scan mode	Scan timer	WX alert	DUAL/TRI	DSCÊwatch
		Push 16 9		Beep tone
		Push 16 9		Beep
				Beep
Scrambler type	Scrambler code	Attenuation level	LCD contrast	Internal speaker
Scrambler	Scrambler	Attenuation	LCD	Internal
type	code	level	contrast	speaker

30

Image 34

Contents IM502 Case of Emergency Channel 16 is automatically selectedTable of Contents Page Ship Station License Operating RulesRadio license for boaters U.S.A. only OPERATOR’S LicensePanel description Transmit Power Switch HI/LOPanel Description Channel Selector Channel1DSC/POSITION Switch DSC/ENTPOS Function display Same as the HI/LO switch on the front panel. p PTT Switch PTTChannel UP/DOWN Switches Y/Z MicrophoneChannel Basic OperationChannel selection Channel 9 Call channelCanadian channels Microphone lock functionWeather channels Push once CH/WXPush LO/DX to turn the receive attenuator on or OFF if Push HI/LO to select the output power if necessaryReceiving and transmitting NecessaryChannel names Call channel programming25W TAG äLEASURE Activating the scrambler Programming scrambler codes Set mode Scrambler code itemOptional voice scrambler operation Optional scrambler function on or OFFDUALWATCH/TRI-WATCH Simulation Description OperationCall channel Priority Scan Scan OperationsScan types Normal ScanClearing all tag channels in the selected channel group Setting tag channels Starting a scanScan starts Position and time programming DSC OperationMmsi code programming LATÊÊÊÊ LonêêêêêUTCÊÊ Position indicationInputÊtime LATÊ3434N LON13534EGPSÊUTC1234 Distress callDistressÊÊTX LATÊ3523N LON13535E Distress Completed WaitÊforÊACKÊindvêack Transmitting DSC callsTransmitting individual call DSC/ENTTransmitting individual acknowledgement ˘INDVÊACKPush DSC/ENT to transmit the all ships call Transmitting all ships call˘AllÊships All ships call has been transmittedTransmitting position reply call Transmitting position request callPosêreq SelÊnature ÊUndesign ˘Explosion ÊFlooding Setting the distress informationSelÊitem ÊRCVÊcalls ˘DTRSÊset ÊSet-up Push Distress for 5 sec. to transmit the distress callDeleting address ID DSC individual IDProgramming address ID NameReceiving a distress call Receiving DSC callsReceiving a distress acknowledgement Receiving an all ships call Receiving a distress relay acknowledgementReceiving a distress relay call Receiving an individual callReceiving a position request call Receiving a geographical area callReceiving a position reply call ÊtomSet-up ÊAddÊID ÊDeleteÊID ˘OffsetÊtime DSC set modeOffset time OffsetÊtime 0000 1200Check the 9-digit Mmsi DSC self ID code Mmsi code checkSet-up ÊDeleteÊID ÊOffsetÊtime ˘MMSIÊcheck MMSIÊcheck 123456789SelÊMessage ˘Distress ÊOther Receive messagesSelÊitem ˘RCVÊcalls ÊDTRSÊset ÊSet-up ToÊclear ThisÊdata NoÊDSC/ENT YesÊH/LIntercom Intercom OperationIntercom operation TalkSET Mode Construction SET ModeSet mode programming Push 16Scan resume timer Set mode itemsScan mode Weather alertBeep tone DSC watchInternal speaker Scrambler code LCD contrastAttenuation level Scrambler typeFuse replacement Connections and MaintenanceSupplied accessories CleaningConnections Microphone HangerMounting the transceiver Using the supplied mounting bracketOverhead Mounting Mounting on Dashboard Using the optional mounting bracket Attach the clamps on either side of the IC-M502Optional unit installation Dimensions Troubleshooting Problem Possible Cause Solution† Low power only Receive only Channel ListGeneral Specifications and OptionsSpeciﬁcations TransmitterOptions HM-127 REMOTE-CONTROL Microphone Power Switch PWR pgsPTT Switch PTT pgs Push and hold to transmit release to receiveTransmit Power Switch H/L SQUELCH/MONITOR/LOCK Switch SqlmonilVOLUME/DIMMER Switch Voldim 0SCAN Switch SCNTAGpgs0PRIORITY Channel Indicator HM-127 supplied accessories Installation Installation is finished when it is completedMm 3⁄32˝ 24 to 27 d mm 15⁄16 to 11⁄16˝ Mm 29⁄32˝ Gasket Push CH/WX to select regular channel Channel A., International and Canadian channelsCall channel Condition before selecting the Push Weather channel groupRF attenuator function Push H/L to select the output power, if necessaryPush LO/DX to turn the RF Attenuator function on and OFF Monitor function Lock functionsDisplay backlighting Activating the lock functionPush Y/Z to select the desired channel Activating the scramblerProgramming scramble codes To turn the scrambler func Tion OFF, repeat step wSetting tag channels Dualwatch/Tri- watch operationTurn power OFF While pushing 169, turn power on Entering set modeBeep toneBEEP Intercom beep function Intercom operation Channel namesAvailable characters 149 57⁄˝ TemplateCut here R11 Mm 3⁄32˝Kamiminami, Hirano-ku, Osaka 547-0003 Japan