Icom IC-M502 Position indication, InputÊtime, UtcêÊ, LATÊ3434N LON13534E, GPSÊUTC1234 Calling

Page 19

rPush [DSC/ENT] to set the position and advance to time setting condition.

• Push [LO/DX] to abandon the setting and exit the condition.

InputÊtime

UTC:ÊÊ:

Null˘[H/L]

tRotate the channel selector to select the digit of current UTC time.

yPush [CH/WX] to advance the cursor.

•Push [SCAN] to move the cursor backward.

•Push [HI/LO] to clear the time.

uPush [DSC/ENT] to set the time.

• Push [LO/DX] to abandon the setting and exit the condition.

DSC OPERATION 6

■Position indication

When an optional GPS receiver (NMEA0183 ver. 2.0) is con- nected, the transceiver can display the current position and time. When no GPS receiver is connected, the transceiver displays the manually entered position and time.

A GPS receiver appropriate for the IC-M502 is not supplied from Icom. An NMEA0183 ver. 2.0 is required for position in- dication. Ask your dealer about the GPS receiver.

➥Push [DSC/ENT•POS] for 1 sec. to display the current po- sition and time.

•“MNL” (manual) appears instead of the “GPS” indication when the position data is entered manually.

LAT:Ê34°34'N

LON:135°34'E

GPSÊUTC12:34

CALLING

15

Image 19

Contents IM502 Channel 16 is automatically selected Case of EmergencyTable of Contents Page OPERATOR’S License Operating RulesRadio license for boaters U.S.A. only Ship Station LicenseChannel Selector Channel Transmit Power Switch HI/LOPanel Description Panel description1DSC/POSITION Switch DSC/ENTPOS Function display Microphone PTT Switch PTTChannel UP/DOWN Switches Y/Z Same as the HI/LO switch on the front panel. pChannel 9 Call channel Basic OperationChannel selection ChannelPush once CH/WX Microphone lock functionWeather channels Canadian channelsNecessary Push HI/LO to select the output power if necessaryReceiving and transmitting Push LO/DX to turn the receive attenuator on or OFF ifChannel names Call channel programming25W TAG äLEASURE Optional scrambler function on or OFF Set mode Scrambler code itemOptional voice scrambler operation Activating the scrambler Programming scrambler codesDUALWATCH/TRI-WATCH Simulation Description OperationCall channel Normal Scan Scan OperationsScan types Priority ScanClearing all tag channels in the selected channel group Setting tag channels Starting a scanScan starts LATÊÊÊÊ Lonêêêêê DSC OperationMmsi code programming Position and time programmingLATÊ3434N LON13534E Position indicationInputÊtime UTCÊÊDistress Completed WaitÊforÊACK Distress callDistressÊÊTX LATÊ3523N LON13535E GPSÊUTC1234DSC/ENT Transmitting DSC callsTransmitting individual call Êindvêack˘INDVÊACK Transmitting individual acknowledgementAll ships call has been transmitted Transmitting all ships call˘AllÊships Push DSC/ENT to transmit the all ships callTransmitting position reply call Transmitting position request callPosêreq Push Distress for 5 sec. to transmit the distress call Setting the distress informationSelÊitem ÊRCVÊcalls ˘DTRSÊset ÊSet-up SelÊnature ÊUndesign ˘Explosion ÊFloodingName DSC individual IDProgramming address ID Deleting address IDReceiving a distress call Receiving DSC callsReceiving a distress acknowledgement Receiving an individual call Receiving a distress relay acknowledgementReceiving a distress relay call Receiving an all ships callÊtom Receiving a geographical area callReceiving a position reply call Receiving a position request callOffsetÊtime 0000 1200 DSC set modeOffset time Set-up ÊAddÊID ÊDeleteÊID ˘OffsetÊtimeMMSIÊcheck 123456789 Mmsi code checkSet-up ÊDeleteÊID ÊOffsetÊtime ˘MMSIÊcheck Check the 9-digit Mmsi DSC self ID codeToÊclear ThisÊdata NoÊDSC/ENT YesÊH/L Receive messagesSelÊitem ˘RCVÊcalls ÊDTRSÊset ÊSet-up SelÊMessage ˘Distress ÊOtherTalk Intercom OperationIntercom operation IntercomPush 16 SET ModeSet mode programming SET Mode ConstructionWeather alert Set mode itemsScan mode Scan resume timerBeep tone DSC watchInternal speaker Scrambler type LCD contrastAttenuation level Scrambler codeCleaning Connections and MaintenanceSupplied accessories Fuse replacementMicrophone Hanger ConnectionsMounting the transceiver Using the supplied mounting bracketOverhead Mounting Mounting on Dashboard Attach the clamps on either side of the IC-M502 Using the optional mounting bracketOptional unit installation Dimensions Problem Possible Cause Solution TroubleshootingChannel List † Low power only Receive onlyTransmitter Specifications and OptionsSpeciﬁcations GeneralOptions Push and hold to transmit release to receive Power Switch PWR pgsPTT Switch PTT pgs HM-127 REMOTE-CONTROL Microphone0SCAN Switch SCNTAGpgs SQUELCH/MONITOR/LOCK Switch SqlmonilVOLUME/DIMMER Switch Voldim Transmit Power Switch H/L0PRIORITY Channel Indicator HM-127 supplied accessories Installation is finished when it is completed InstallationMm 3⁄32˝ 24 to 27 d mm 15⁄16 to 11⁄16˝ Mm 29⁄32˝ Gasket Condition before selecting the Push Weather channel group Channel A., International and Canadian channelsCall channel Push CH/WX to select regular channelRF attenuator function Push H/L to select the output power, if necessaryPush LO/DX to turn the RF Attenuator function on and OFF Activating the lock function Lock functionsDisplay backlighting Monitor functionTo turn the scrambler func Tion OFF, repeat step w Activating the scramblerProgramming scramble codes Push Y/Z to select the desired channelDualwatch/Tri- watch operation Setting tag channelsTurn power OFF While pushing 169, turn power on Entering set modeBeep toneBEEP Intercom beep function Intercom operation Channel namesAvailable characters R11 Mm 3⁄32˝ TemplateCut here 149 57⁄˝Kamiminami, Hirano-ku, Osaka 547-0003 Japan