13
■Starting a scan
qPush [CH/WX•U/I/C] several times while pushing [H/L] to select the channel group (USA, INT, CAN), if desired.
•When the weather alert function is in use, select the desired weather channel with [CH/WX] and [Y]/[Z].
wPush [SCN] to start priority or normal scan.
•“SCAN” appears during normal scan.
•The priority channel readout indicates “16”, and “P” and “SCAN” indicators ap- pear during priority scan.
•When a signal is received, scan pauses until the signal disappears or resumes after pausing 5 sec. according to set mode setting (Channel 16 is still moni- tored during priority scan).
•Push [Y]/[Z] to check the scanning tag channels, to change the scanning direc- tion or resume the scan manually.
eTo stop the scan, push [SCN].
•“SCAN” disappears.
•Pushing [PTT], [16•9] or [CH/WX] also stops the scan.
■Setting tag channels
qPush [CH/WX•U/I/C] several times
while pushing [H/L] to select the channel group (USA, INT, CAN), if desired.
wPush [Y]/[Z] to select the desired
channel to set as a tag channel.
ePush [SCN•TAG] for 1 sec. to set the displayed channel as a tag channel.
• “ ” appears.
rTo cancel the tag channel setting, push [SCN•TAG] for 1 sec.
• “ ” disappears.
•Clearing all tag channels in the selected channel group
➥Push [SCN•TAG] while pushing [H/L] for 3 sec. (until long beep changes to 2 short beeps).
■Dualwatch/Tri- watch operation
qPush [Y]/[Z] to select the desired channel.
•Push [CH/WX•U/I/C] several times while pushing [H/L] to select the channel group (USA, INT, CAN), if desired.
wPush [CH/WX•DW] for 1 sec. to start dualwatch or tri-watch.
•“DUAL” appears during dualwatch; “TRI” appears during
•Beep tone sounds when a signal is re- ceived on channel 16.
•
eTo cancel
54