Radio mode
Radio mode
This device is equipped with an RDS radio receiver. Many of the receivable FM stations broadcast a signal that not only carries the programme but also additional information such as the station name and programme type (PTY).
The station name appears on the display as soon as the tuner receives it. The pro- gramme type can be displayed upon re- quest. For further information, please read the section entitled "Programme type (PTY)".
Adjusting the tuner
To ensure proper functioning of the tuner, the device must be set for the region in which you are located. You can select be- tween Europe and America (USA). The tun- er is
Press the MENU button 9.
Press the softkey 5 with the display label "TUNER".
Press the softkey 5 with the display label for the desired region, "AREA EUR" or "AREA USA".
Press the OK joystick 8or the MENU button 9to exit the menu.
The settings are saved.
Setting the number of antennas
This device is equipped with two RDS radio receivers (TwinCeiver). You can connect one or two antennas to the device. If two antennas are used (strongly recommend- ed, the second antenna is part of the scope of delivery) a directional receiption of the station being received is possible in DDA radio mode. In most cases, the directional receiption significantly improves the recep- tion quality.
Note:
To ensure proper functioning of the tuner, the main antenna must be con- nected to the bottom antenna socket.
To set the number of antennas,
press the MENU button 9.
Press the softkey 5 with the display label "TUNER".
Press the softkey 5 with the display label "ONE ANTE" if one antenna is con- nected to the device.
Or
Press the softkey 5 with the display label "TWO ANTE" if two antennas are connected to the device.
Press the OK joystick 8or the MENU button 9to exit the menu.
The settings are saved.
68
