Manuals / Blaupunkt / Car Audio and Video / Car Stereo System

Blaupunkt MP76 Adjusting the centre speaker, Adjusting high-pass ﬁlters for front/rear

Models: MP76

1 55

Download 55 pages 33.69 Kb

Page 48

Subwoofer and centre speaker

Move the joystick 8left or right to se- lect among the available frequencies.

Move the joystick 8 up or down to select the desired quality factor for the deﬁned frequency.

When you have ﬁnished making your changes,

press the OK joystick 8or the AUDIO button :.

Adjusting the centre speaker

You can select the frequency at which a connected centre speaker should be con- trolled.

You can select from the frequencies "200 Hz", "400 Hz", "800 Hz", "1600 Hz" and "3200 Hz". If you select the setting "FLAT", all frequencies are output via the centre speaker, including bass. This set- ting should be selected only if your centre speaker features a built-in high-pass ﬁlter.

In addition to the frequency, you can adjust the level for the centre speaker.

Press the AUDIO button :. "AUDIO MENU" appears on the display.

Press the NEXT button 4.

"AUDIO MENU 2" appears on the display.

Press the softkey 5 with the display label "CENTRE".

Press the joystick 8 left or right to adjust the frequency for the centre speaker.

Press the joystick 8up or down to ad- just the level for the centre speaker.

When you have ﬁnished making your changes,

press the OK joystick 8or the AUDIO button :.

Adjusting high-pass ﬁlters for front/rear

You can adjust a separate high-pass ﬁlter for the front and the rear channel that ﬁlters all frequencies below the adjusted frequency so that the ﬁltered frequencies are played only by a connected subwoofer.

If you select the setting "FLAT", no frequen- cies are ﬁltered and all signals are forward- ed to the loudspeakers. The setting "AUTO" automatically adjusts the high-pass ﬁlter to the value deﬁned for the low-pass ﬁlter.

Press the AUDIO button :. "AUDIO MENU" appears on the display.

Press the NEXT button 4.

"AUDIO MENU 2" appears on the display.

Press the softkey 5 with the display label "HIPASS F" for setting the front high-pass ﬁlter.

Or

Press the softkey 5 with the display label "HIPASS R" for setting the rear high-pass ﬁlter.

Press the joystick 8 left or right to adjust the frequency for the high-pass ﬁlter.

When you have ﬁnished making your chang- es,

press the OK joystick 8or the AUDIO button :.

100

Image 48

Blaupunkt MP76 operating instructions Adjusting the centre speaker, Adjusting high-pass ﬁlters for front/rear

Contents

Bremen MP76 Page Slot for MMC/SD Volume CD modeDisplay MP3 mode Adjusting high-pass ﬁlters for Front/rearRepeating individual tracks or TMC for dynamic navigation SystemsRoad safety Safety noteInstallation Disposal of old unitActivating/deactivating demo mode Theft protectionDetachable control panel Detaching the control panelSwitching on/off Switching on/off using buttonSwitching on/off using the vehicle ignition Attaching the control panelVolume Setting the power-on volumeRisk of injury MuteNavigation audio Activating the navigation audioSound and volume relationship Adjusting the bassAdjusting the treble Adjusting the navigation minimum volumeSetting the left/right volume ratio balance Adjusting the front/rear volume ratio faderTo adjust the balance, press the Audio button To adjust the fader, press the Audio buttonAdjusting the viewing angle Setting the button illumination colourAdjusting the display brightness DisplaySetting the display illumination colour Selecting a preset colourMixing a colour for the display illumination Inverting display contents Radio mode Adjusting the tunerSetting the number of antennas Switching to radio mode Selecting static/dynamic radio mode FM onlyPRE mode static Digital Directional Antenna mode DDA staticSelecting the radio mode Switching the RDS function on/offSwitching REG on/off Convenient RDS functions AF, REGTo switch between the FM memory banks FM1, FM2, FM3 and FMT Selecting the waveband/memory bankBand is displayed Selecting a wavebandTuning into a station Setting the sensitivity of station seek tuningAutomatic station seek tuning Tuning into stations manuallySetting the scanning time Scanning receivable stations ScanStoring stations Storing stations automatically TravelstoreListening to stored stations Programme type PTYActivating PTY Deactivating PTYSelecting a programme type and starting seek tuning Treble reduction feature during interference HiCutAdjusting HiCut Optimising radio receptionSwitching TIM on/off Switching TIM offTIM Trafﬁc Information Memory Switching TIM on Recording trafﬁc announcementsSelecting the TIM message Playing stored trafﬁc announcementsSetting the timer Selecting timersSetting the volume for trafﬁc announcements Switching trafﬁc information priority on/offTrafﬁc information CD mode Ejecting a CDSelecting tracks Starting CD mode, inserting a CDFast searching audible Random track play MIXRepeating tracks Repeat Scanning tracks ScanMP3 mode Adjusting the scrolling textTrafﬁc announcements in CD mode Switching CD scrolling text on/offInserting/removing MMCs/SDs D01 D02Switching to MMC/SD mode Activating the MP3 mode of CDOperation during the MP3 mode Inserting an MMC/SDPress the Next button 4to redisplay the MP3 main menu Track from itMP3 main menu Selecting a track with the joystickCancelling Scan and continuing listening to a track Conﬁguring the displayRepeating individual tracks or whole directories Repeat Adjusting the scrolling text Press the softkey 5 with the display label Show ALLNext tracks are scanned in ascending order CD changer mode optional Switching to CD-changer modeSelecting CDs Naming CDs Repeating individual tracks or whole CDs RepeatRepeat CD brieﬂy appears on the dis- play To stop the current track or current CD from being repeatedDeleting a CD name CD name is deletedDeleting all CD names CD names are deletedSetting the time Setting the time automaticallySetting the clock manually Setting the dateDSA Max Digital Sound Adjustment Switching DSA on/offSwitching DSA off Permanent time displaySwitching DSA on Automatically calibrating the equalizerTo reactivate the equalizer EQ 1 For the driver aloneViewing vehicle acoustics with/ without equalizer Manually changing the graphical equalizerResetting the equalizer Selecting a sound presetting PresetAfter the calibration or the manual adjust- ment Presettings for the following music styles are availableAdjusting the stage effect Selecting a sound effectSelecting the stage effect Changing the virtual distance of the loudspeakersSwitching DNC off Calibrating DNCStarting the DNC calibration Adjusting the subwoofer increase Subwoofer and centre speakerSelecting a DNC increase To select a DNC increaseAdjusting the subwoofer phase position Setting the low-pass ﬁlterSetting the subsonic ﬁlter Adjusting the centre speaker Adjusting high-pass ﬁlters for front/rearTMC for dynamic navigation systems Crossover101 Switching the internal ampliﬁer on/off Ampliﬁer/Sub-OutExternal audio sources 102Switching the AUX input on/off Be selected using the Source buttonNaming the AUX input Press the softkey 5 with the display label AUX1Resetting the device Entering a switch-on messageMiscellaneous Displaying the serial numberSpeciﬁcations 319 Gerätepass