Blaupunkt MP76 TIM Traffic Information Memory, Switching TIM on/off, Switching TIM off

Models: MP76

1 55
Download 55 pages 33.69 Kb
Page 24
Image 24

TIM – Traffic Information Memory

TIM – Traffic Information Memory

The device features a digital voice memory which allows for automatically recording up to four traffic announcements. The maxi- mum length for recorded messages is four minutes.

If the TIM function is activated, all traffic an- nouncements that are received two hours after the last switch-off of the device are recorded. In addition, you can also set two fixed times (Timer). All traffic announce- ments that are broadcast 30 minutes be- fore and 90 minutes after the specified time on the selected traffic announcement program are recorded. This function is par- ticularly useful if you are using your car at fixed times.

If the last message is older than six hours, all messages are deleted.

If a new traffic announcement arrives dur- ing the TIM playback, the playback is inter- rupted and the new message is recorded.

Risk of damage to the motorised antenna in a car wash. An auto- matic motorised antenna remains ex-

tended if TIM is activated and you switch off the device. In a car wash, the extend- ed motorised antenna may cause dam- ages. For further information, please read the section entitled "Switching TIM off".

Switching TIM on/off

If the car sound system is switched on, you can switch the TIM functions on or off.

￿In radio mode, hold the TUNER button = pressed for longer than two sec- onds.

The TIMPLAY menu is displayed.

If traffic announcements were recorded, the last message is played. The most cur- rent message has the number "TIM1". The station name/frequency appears in the top line of the display and the time of the re- cording in the bottom line.

"TIM" and the number of the message ap- pear next to the top two softkeys on both sides of the display.

If no messages are recorded, "NO TIM" briefly appears on the display.

Switching TIM off

If you want to switch TIM off,

￿In radio mode, hold the TUNER button = pressed for longer than two sec- onds.

The TIMPLAY menu is displayed.

￿Press the NEXT button 4. The TIMSET menu again.

￿Press the softkey 5 with the display label "TIM ON" repeatedly until "TIM RECORD OFF" appears on the display.

￿press the TUNER button =or the OK joystick 8.

The settings are saved.

76

Page 24
Image 24
Blaupunkt MP76 operating instructions TIM Traffic Information Memory, Switching TIM on/off, Switching TIM off