Display, Adjusting the viewing angle | Blaupunkt MP76 specs

Move the ﬂashing selection mark be- hind "DAY" or "NIGHT" by moving the joystick 8to the left or the right.

Display

Display

You can adjust the display to suit the instal- lation position in your vehicle and to suit your needs.

Set the desired value by moving the joy- stick 8up or down.

Press the OK joystick 8or the MENU button 9to exit the menu.

The settings are saved.

Adjusting the viewing angle

Press the MENU button 9.

Press the softkey 5 with the display label "DISPLAY".

Press the softkey 5 with the display label "ANGLE".

Move the joystick 8 up or right or down or left to adjust the viewing angle.

Press the OK joystick 8or the MENU button 9to exit the menu.

The settings are saved.

Adjusting the display brightness

If your car sound system is connected as described in the installation instructions, the display brightness switches with the headlights. The display brightness can be adjusted separately for day and night in in- crements from 1-16.

Display brightness

Press the MENU button 9.

Press the softkey 5 with the display label "DISPLAY".

Press the softkey 5 with the display label "BRIGHT".

The top line of the display shows "DAY" and "NIGHT" together with the current values.

Setting the button illumination colour

You can set the colour in which the buttons of the device are illuminated.

16 colours are available.

Press the MENU button 9.

Press the softkey 5 with the display label "DISPLAY".

Press the softkey 5 with the display label "KEYCOLOR".

Move the joystick 8 up or right or down or left to adjust a colour. Every movement of the joystick selects a dif- ferent colour.

Press the OK joystick 8or the MENU button 9to exit the menu.

The settings are saved.

ENGLISH

65

Image 13

Blaupunkt MP76 Adjusting the viewing angle, Setting the button illumination colour, Display brightness

Contents

Bremen MP76 Page Slot for MMC/SD CD mode VolumeDisplay Adjusting high-pass ﬁlters for Front/rear MP3 modeRepeating individual tracks or TMC for dynamic navigation Systems Safety note Road safetyInstallation Disposal of old unit Theft protection Activating/deactivating demo modeDetachable control panel Detaching the control panel Switching on/off using button Switching on/offSwitching on/off using the vehicle ignition Attaching the control panel Setting the power-on volume VolumeRisk of injury Mute Activating the navigation audio Navigation audio Adjusting the bass Sound and volume relationshipAdjusting the treble Adjusting the navigation minimum volume Adjusting the front/rear volume ratio fader Setting the left/right volume ratio balanceTo adjust the balance, press the Audio button To adjust the fader, press the Audio button Setting the button illumination colour Adjusting the viewing angleAdjusting the display brightness Display Selecting a preset colour Setting the display illumination colourMixing a colour for the display illumination Inverting display contents Adjusting the tuner Radio modeSetting the number of antennas Selecting static/dynamic radio mode FM only Switching to radio modePRE mode static Digital Directional Antenna mode DDA static Switching the RDS function on/off Selecting the radio modeSwitching REG on/off Convenient RDS functions AF, REG Selecting the waveband/memory bank To switch between the FM memory banks FM1, FM2, FM3 and FMTBand is displayed Selecting a waveband Setting the sensitivity of station seek tuning Tuning into a stationAutomatic station seek tuning Tuning into stations manually Scanning receivable stations Scan Setting the scanning timeStoring stations Storing stations automatically Travelstore Programme type PTY Listening to stored stationsActivating PTY Deactivating PTY Treble reduction feature during interference HiCut Selecting a programme type and starting seek tuningAdjusting HiCut Optimising radio reception Switching TIM off Switching TIM on/offTIM Trafﬁc Information Memory Recording trafﬁc announcements Switching TIM onSelecting the TIM message Playing stored trafﬁc announcements Selecting timers Setting the timer Switching trafﬁc information priority on/off Setting the volume for trafﬁc announcementsTrafﬁc information Ejecting a CD CD modeSelecting tracks Starting CD mode, inserting a CD Random track play MIX Fast searching audibleRepeating tracks Repeat Scanning tracks Scan Adjusting the scrolling text MP3 modeTrafﬁc announcements in CD mode Switching CD scrolling text on/off D01 D02 Inserting/removing MMCs/SDs Activating the MP3 mode of CD Switching to MMC/SD modeOperation during the MP3 mode Inserting an MMC/SD Track from it Press the Next button 4to redisplay the MP3 main menuMP3 main menu Selecting a track with the joystick Conﬁguring the display Cancelling Scan and continuing listening to a trackRepeating individual tracks or whole directories Repeat Press the softkey 5 with the display label Show ALL Adjusting the scrolling textNext tracks are scanned in ascending order Switching to CD-changer mode CD changer mode optionalSelecting CDs Repeating individual tracks or whole CDs Repeat Naming CDsRepeat CD brieﬂy appears on the dis- play To stop the current track or current CD from being repeated CD name is deleted Deleting a CD nameDeleting all CD names CD names are deleted Setting the time automatically Setting the timeSetting the clock manually Setting the date Switching DSA on/off DSA Max Digital Sound AdjustmentSwitching DSA off Permanent time display Automatically calibrating the equalizer Switching DSA onTo reactivate the equalizer EQ 1 For the driver alone Manually changing the graphical equalizer Viewing vehicle acoustics with/ without equalizer Selecting a sound presetting Preset Resetting the equalizerAfter the calibration or the manual adjust- ment Presettings for the following music styles are available Selecting a sound effect Adjusting the stage effectSelecting the stage effect Changing the virtual distance of the loudspeakers Calibrating DNC Switching DNC offStarting the DNC calibration Subwoofer and centre speaker Adjusting the subwoofer increaseSelecting a DNC increase To select a DNC increase Setting the low-pass ﬁlter Adjusting the subwoofer phase positionSetting the subsonic ﬁlter Adjusting high-pass ﬁlters for front/rear Adjusting the centre speaker Crossover TMC for dynamic navigation systems101 Ampliﬁer/Sub-Out Switching the internal ampliﬁer on/offExternal audio sources 102 Be selected using the Source button Switching the AUX input on/offNaming the AUX input Press the softkey 5 with the display label AUX1 Entering a switch-on message Resetting the deviceMiscellaneous Displaying the serial number Speciﬁcations 319 Gerätepass