Radio mode
press the TUNER button =or the OK Press the softkey 5 with the display
joystick 8. | label "SW" for the SW waveband. |
The settings are saved. | The basic radio menu of the selected wave- |
| band is displayed. |
Selecting the waveband/memory bank
This device can receive programmes broad- cast over the FM frequency range as well as the MW, LW and SW (AM) wavebands. Four memory banks are available for the FM waveband and one memory bank each for the wavebands MW, LW and SW.
In dynamic radio mode, up to five levels are available.
Six stations can be stored in each memory bank.
Note:
If your device is set to the region USA, you can select between the wavebands FM and AM. In addition, the memory banks AM1, AM2, and AMT are avail- able for the AM waveband.
Selecting a waveband
To select an FM, MW, LW or SW waveband,
press the TUNER button = in radio mode.
The display shows the radio function menu.
Press the softkey 5 with the display label "BAND".
Press the softkey 5 with the display label "FM" for the FM waveband.
Press the softkey 5 with the display label "MW" for the MW waveband.
Press the softkey 5 with the display label "LW" for the LW waveband.
Selecting the FM memory bank
To switch between the FM memory banks FM1, FM2, FM3 and FMT,
press the NEXT button 4 repeatedly until the display shows the desired memory bank.
The memory banks are called in sequence from FM1 to FM2, FM3 and FMT.
Note:
If your device is set to the region USA and you selected the AM waveband, you can use the NEXT button 4to se- lect from the AM memory banks AM1, AM2 and AMT.
ENGLISH
71
