DSC Max – Equalizer
Viewing vehicle acoustics with/ without equalizer
You can view the determined values for the vehicle acoustics. When viewing the set- tings, you can select between the equalizer view without equalization ("PRE EQ") and with equalization ("POST EQ").
Press and hold the AUDIO button : for longer than two seconds.
Press the softkey 5 with the display label "USER EQ".
Press the softkey 5 with the display label of the equalizer to be viewed.
Press the softkey 5 with the display label "ADJUST".
Press the softkey 5 with the display label "MANUAL".
You can view the settings of the equalizer separately for the front and the rear loud- speakers.
Note:
If you already changed the graphical equalizer manually or if you have not yet performed a calibration, the softkeys described below cannot be selected.
If you want to select the view of the equal- izer without equalization,
Press the softkey 5 with the display label "VIEW PRE" on the left side of the display for front or on the right side for rear.
The setting of the equalizer is displayed.
If you want to select the view of the equal- izer with equalization,
press the softkey 5 with the display label "VIEWPOST" on the left side of
the display for front or on the right side for rear.
The setting of the equalizer is displayed. To exit the view,
press the OK joystick 8or the AUDIO button :.
Manually changing the graphical equalizer
The automatically determined values of the graphical equalizer can also be changed manually.
press and hold the AUDIO button : for longer than two seconds.
Press the softkey 5 with the display label "USER EQ".
Press the softkey 5 with the display label of the equalizer to be set.
Press the softkey 5 with the display label "ADJUST".
Press the softkey 5 with the display label "MANUAL".
You can adjust the equalizer separately for the front and rear loudspeakers.
Press the softkey 5 with the display label "FRONT EQ" for the front loud- speakers or "REAR EQ" for the rear loudspeakers.
The settings of the graphical equalizer are displayed.
To select the frequency,
press the joystick 8left or right until the desired frequency is displayed.
Set the level for the frequency by mov- ing the joystick 8up or down.
94
