Blaupunkt MP76 operating instructions TMC for dynamic navigation systems, Crossover, 101

Subwoofer and centre speaker TMC

Crossover

In crossover mode, the high frequencies are played via the front channels and the low frequencies via the rear channels.

￿Press the AUDIO button :. "AUDIO MENU" appears on the display.

￿Press the NEXT button 4.

"AUDIO MENU 2" appears at the bottom of the display.

￿Press the softkey 5 with the display label "CROSSOVR".

Crossover is now adjusted.

To be able to use the crossover mode, you must set the high-pass filter and the low- pass filter.

￿Press the softkey 5 with the display label "HIPASS" for setting the high-pass filter.

￿Press the joystick 8 left or right to adjust the frequency for the high-pass filter.

￿Press the softkey 5 with the display label "LOWPASS" for setting the low- pass filter.

￿Press the joystick 8 left or right to adjust the frequency for the high-pass filter.

The settings are automatically saved.

TMC for dynamic navigation systems

TMC stands for "Traffic Message Chan- nel". Traffic reports are broadcast digitally via TMC, which means they can be used by compatible navigation systems during route planning. Your car sound system has a TMC output, which you can use for connect- ing Blaupunkt navigation systems. You can find out from your Blaupunkt dealer which navigation systems can be used with your car sound system.

ENGLISH

101