Blaupunkt MP76 Scanning receivable stations Scan, Setting the scanning time, Storing stations

Models: MP76

1 55
Download 55 pages 33.69 Kb
Page 21
Image 21

Radio mode

Scanning receivable stations (SCAN)

You can use the scan function to play all the receivable stations briefly. You can set the scanning time in the menu to between 5 and 30 seconds.

Starting SCAN

￿Press and hold down the OK joystick 8for longer than two seconds.

Scanning begins. "SCAN" appears briefly on the display followed by a flashing display of the current station name or the frequen- cy of the station.

Cancelling SCAN and continuing listening to a station

￿Press the OK joystick 8.

Scanning stops and the radio continues playing the station that it tuned into last.

Setting the scanning time

￿Press the MENU button 9.

￿Press the softkey 5 with the display label "VARIOUS".

￿Press the softkey 5 with the display label "SCANTIME".

￿Move the joystick 8 up or right or down or left to set the scan time.

￿Press the OK joystick 8or the MENU button 9to exit the menu.

The settings are saved.

Note:

The defined scanning time is also ap- plied by the system to scanning carried out in CD/MP3 and CD-changer mode.

Storing stations

Storing stations manually

￿ Select the desired FM memory bank

 

(FM1, FM2, FM3, FMT) or one of the

 

 

wavebands (MW, LW or SW).

ENGLISH

￿

Tune into the desired station as de-

 

scribed under "Tuning into a station".

￿ Press and hold down one of the six softkeys for longer than two seconds to which you want to assign the station.

Storing stations automatically (Travelstore)

You can automatically store the six stations offering the strongest reception in the re- gion (FM only). The stations are stored in the FMT memory bank.

Notes:

If your device is set to the region USA, you can also start the Travelstore in the AM radio mode. The stations are then stored on the AMT level.

Any stations that were previously stored in this memory bank are de- leted in the process.

Starting the Travelstore function

￿Press the TUNER button = in radio mode.

The display shows the radio function menu.

￿Press the softkey 5 with the display label "T-STORE".

The storing procedure begins. "TRAVEL STORE" appears on the display. After the process has completed, the radio will play the station that is stored in memory location one of the FMT (or AMT) memory bank.

73

Page 21
Image 21
Blaupunkt MP76 operating instructions Scanning receivable stations Scan, Setting the scanning time, Storing stations