Icom IC-M503 Set mode items, Scan mode, Scan resume timer, Dual/tri watch, Beep tone

■Set mode items

ïScan mode

The transceiver has 2 scan modes: normal scan and priority scan. Normal scan searches all tag channels in the selected channel group. Priority scan searches all tag channels in se- quence while monitoring channel 16.

Set mode

Scan mode

Priority scan (default) Normal scan

ïScan resume timer

The scan resume timer can be selected as a pause (OFF) or timer scan (ON). When OFF is selected, the scan pauses until the signal disappears. When ON is selected, the scan pauses 5 sec. and resumes even if a signal is being received on channels, except for Channel 16.

Set mode

Scan timer

Scan timer ON (default) Scan timer OFF

SET MODE 6

ïDual/tri watch

This item sets the [DUAL] switch function as dual watch or tri- watch.

See the section ‘Dual watch/Tri-watch’ for details.

Set mode

DUAL/TRI

Dual watch (default) Tri-watch

ïBeep tone

You can select silent operation by turning beep tones OFF or you can have confirmation beeps sound at the push of a switch by turning beep* tones ON.

Set mode

Beep

Beep tone ON (default) Beep tone OFF

*Beep tones setting are selectable on IC-M503 and HM-134 inde-

pendently

15