Icom IC-M503 Entering set mode, Transceiver’s functions, Microphone’s own functions

Page 41

■Set mode programming

Set mode is used to change the condition of the transceiver’s functions and the microphone’s own functions:

Transceiver’s functions—

Scan mode (normal or priority), scan resume timer, dual- watch/tri-watch selection, beep tone function, internal speaker, LCD contrast, scrambler code, scrambler type and ATIS check.

Microphone’s own functions—

Beep tone function, LCD contrast and internal speaker.

In this section, instructions are for the microphone’s own func- tions only. Refer to pgs. 14–16 for the setting of the other functions. (Some functions may not be selectable from the mi- crophone.)

ïEntering set mode

qTurn power OFF.

wWhile pushing and holding [16•C], turn power ON.

•After beep emission, a set mode item (in the channel name indi- cator and condition in the channel number readout) is displayed.

ePush [16•C] to select the desired item, if necessary. r Push [Y]/[Z] to select the desired condition of the item. t Turn power OFF, then ON to exit set mode.

HM-134 REMOTE-CONTROL MICROPHONE 12

•Beep tone “BEEP”

➥Push [Y] to turn ON, [Z] to turn OFF the beep output.

Push

•LCD contrast “LCD CONTRAST”

➥Push [Y]/[Z] to adjust to a suitable LCD contrast.

• • Push

• •

•Internal speaker “INT-SPEAKER”

➥Push [Y]/[Z] to turn the HM-134 internal-speaker ON/OFF.

Push

37

Image 41

Contents IM503 Channel 16 is automatically selected Mayday Mayday MaydayDS-100 #02 DSC Controller is required Table of Contents Page Priorities Operating RulesPrivacy Radio LicensesAdjusts the audio level. p Volume Control VOLPanel Description Panel descriptionPanel Description Function display Channel UP/DOWN Switches Y/Z PTT Switch PTTMicrophone Push and hold to transmit release to receive. pChannel selection Basic OperationChannel ÏCall channelRotate the channel selector to select a channel Basic OperationAtis and DSC channels FRG version only Receiving and transmitting Channel names Call channel programmingRotate the channel selector to select the desired channel Push Call to input and set the nameOptional voice scrambler operation Set mode Scrambler code itemActivating the scrambler Programming scrambler codesDescription DUALWATCH/TRI-WATCHOperation DUALWATCH/TRI-WATCH SimulationScan types Scan OperationsPriority Scan Normal ScanStarting a scan Setting tag channelsScan Operation Clearing all tag channels in the selected channel groupSET Mode Construction SET ModeSet mode programming Scan mode Set mode itemsScan resume timer Dual/tri watchLCD contrast Internal speakerScrambler code Scrambler typeIntercom operation Intercom OperationFuse replacement Connections and MaintenanceCleaning UnpackingConnections Connections and MaintenanceMicrophone hanger Overhead Mounting Mounting on Dashboard Using the supplied mounting bracketMounting the transceiver Using the optional mounting bracket Opening the transceiver case Optional unit installation145.0 5 23⁄32˝ Dimensions109.4 110.0 4 11⁄32˝ 165.0 6 1⁄2˝ 31.4 53.0 Unit mm inchProblem Possible Cause Solution TroubleshootingInternational channels Channel ListOptions Specifications and OptionsSpeciﬁcations PTT Switch PTT pgs Power Switch PWR pgsChannel 16/CALL Channel Switch 16C HM-134 REMOTE-CONTROL MicrophoneHM-134 REMOTE-CONTROL Microphone KEY Lock Indicator p Channel Group Indicator pgs12HM-134 REMOTE-CONTROL Microphone 1EXTERNAL Speaker Jack7WAIT Indicator S.A. and International channels Call channelA. channels International channelsPush H/L to select the output power, if necessary Display backlighting Lock functionsMonitor function Activating the lock functionTo turn the scrambler func Tion OFF, repeat step w Programming scramble codesPush Y/Z to select the desired channel Push Dual to start dualwatch or tri-watch To cancel dualwatch/tri-watch, push Dial againDualwatch/Tri- watch operation Transceiver’s functions Entering set modeMicrophone’s own functions Beep tone BeepAvailable characters Intercom beep functionHM-134 supplied accessories HM-134 Connections and InstallationInstallation Accessories included with the HM-134 Qty13HM-134 Connections and Installation 24 to 27 d mm 15⁄16 to 11⁄16˝ HM-134 Connections and InstallationMm 3⁄ 32˝ x Cut here MB-75 Template149 57⁄8˝ R11 Mm 3⁄32˝Installation notes Installation Notes0560 GER FRA ESP Intended Country of UseAUT NED POR DEN GBR BEL ITA FIN IRL LUX GRE SUI Kamiminami, Hirano-ku, Osaka 547-0003 JapanFrequency MHz Transmit Receive 01A