Icom IC-M503 instruction manual HM-134 Connections and Installation, HM-134 supplied accessories

Page 43

HM-134 CONNECTIONS AND INSTALLATION 13

HM-134 supplied accessories

Accessories included with the HM-134:

Qty.

q Connection cable (OPC-1000: 6 m; 20 ft)

...................... 1

w Mounting base

1

e Microphone hanger

1

r Screws (M3 16; tapping)

5

w e

Installation

The optional HM-134 can be connected to the transceiver di- rectly, as well as via the supplied connection cable for longer distance remote operation. The connector of the connection cable can be installed into a cabinet, wall, etc., as a built-in plug.

For longer distance remote operation, the optional extension cable, OPC-999 (6 m; 20 ft/Connecting between transceiver and the connection cable.), is available, and up to 2 OPC-999 can be added.

qInsert the supplied cable into the external microphone jack and tighten the cable nut as shown below.

r

q

39

Image 43
Contents IM503 DS-100 #02 DSC Controller is required Mayday Mayday MaydayChannel 16 is automatically selected Table of Contents Page Radio Licenses Operating RulesPriorities PrivacyPanel description Volume Control VOLAdjusts the audio level. p Panel DescriptionPanel Description Function display Push and hold to transmit release to receive. p PTT Switch PTTChannel UP/DOWN Switches Y/Z MicrophoneÏCall channel Basic OperationChannel selection ChannelAtis and DSC channels FRG version only Basic OperationRotate the channel selector to select a channel Receiving and transmitting Push Call to input and set the name Call channel programmingChannel names Rotate the channel selector to select the desired channelProgramming scrambler codes Set mode Scrambler code itemOptional voice scrambler operation Activating the scramblerDUALWATCH/TRI-WATCH Simulation DUALWATCH/TRI-WATCHDescription OperationNormal Scan Scan OperationsScan types Priority ScanClearing all tag channels in the selected channel group Setting tag channelsStarting a scan Scan OperationSet mode programming SET ModeSET Mode Construction Dual/tri watch Set mode itemsScan mode Scan resume timerScrambler type Internal speakerLCD contrast Scrambler codeIntercom operation Intercom OperationUnpacking Connections and MaintenanceFuse replacement CleaningConnections Connections and MaintenanceMicrophone hanger Mounting the transceiver Using the supplied mounting bracketOverhead Mounting Mounting on Dashboard Using the optional mounting bracket Opening the transceiver case Optional unit installationUnit mm inch Dimensions145.0 5 23⁄32˝ 109.4 110.0 4 11⁄32˝ 165.0 6 1⁄2˝ 31.4 53.0Problem Possible Cause Solution TroubleshootingInternational channels Channel ListSpecifications Specifications and OptionsOptions HM-134 REMOTE-CONTROL Microphone Power Switch PWR pgsPTT Switch PTT pgs Channel 16/CALL Channel Switch 16CHM-134 REMOTE-CONTROL Microphone 1EXTERNAL Speaker Jack Channel Group Indicator pgsKEY Lock Indicator p 12HM-134 REMOTE-CONTROL Microphone7WAIT Indicator International channels Call channelS.A. and International channels A. channelsPush H/L to select the output power, if necessary Activating the lock function Lock functionsDisplay backlighting Monitor functionPush Y/Z to select the desired channel Programming scramble codesTo turn the scrambler func Tion OFF, repeat step w Dualwatch/Tri- watch operation To cancel dualwatch/tri-watch, push Dial againPush Dual to start dualwatch or tri-watch Beep tone Beep Entering set modeTransceiver’s functions Microphone’s own functionsAvailable characters Intercom beep functionAccessories included with the HM-134 Qty HM-134 Connections and InstallationHM-134 supplied accessories Installation13HM-134 Connections and Installation Mm 3⁄ 32˝ x HM-134 Connections and Installation24 to 27 d mm 15⁄16 to 11⁄16˝ R11 Mm 3⁄32˝ MB-75 TemplateCut here 149 57⁄8˝Installation notes Installation Notes0560 Kamiminami, Hirano-ku, Osaka 547-0003 Japan Intended Country of UseGER FRA ESP AUT NED POR DEN GBR BEL ITA FIN IRL LUX GRE SUIFrequency MHz Transmit Receive 01A