Icom IC-M503 instruction manual Intercom beep function, Available characters

12HM-134 REMOTE-CONTROL MICROPHONE

■Intercom operation

qPush and hold [DUAL] for 1 sec.

to activate the intercom function.

• “IC” appears in the priority channel readout.

• The channel name disappears.

wPush [PTT] to talk.

• “	” appears in the channel	Appears when the inter-
name indicator.		com function is in use.

eRelease [PTT] to listen.

•“ ” appears in the channel name indicator when the trans- ceiver is in talking mode.

rPush [DUAL] to cancel the intercom function.

•Pushing [16], [SCAN•TAG] or [DIAL] is also cancels the intercom function.

For your reference:

In case the intercom mode is selected with the transceiver during microphone power OFF, the microphone power is au- tomatically turned ON and the intercom mode is selected.

ïIntercom beep function

➥Push and hold [DIAL] for more than 1 sec.

•Emits intercom beep while holding.

■Channel names

qPush [Y]/[Z] to select a channel to program.

•While pushing and holding [H/L], push [DIAL] several times to select the channel group (USA and INT), if desired.

wWhile pushing and holding [H/L], push [16•C].

•The 1st character of the currently programmed comment flashes. e Push [Y]/[Z] to select a character.

r Push [SQL] to move to right; then push [Y]/[Z] to select a character.

•Push [VOL] to move to the left.

tContinue until the desired characters have been selected, then push [16•C] to return to normal operation.

•Available characters

(space)	(!)	(")	(#)	($)	(%)	(&)	(’)	(( )	( ))
(✱)	(+)	(,)	(–)	(.)	(/)	(0)	(1)	(2)	(3)
(4)	(5)	(6)	(7)	(8)	(9)	(A)	(B)	(C)	(D)
(E)	(F)	(G)	(H)	(I)	(J)	(K)	(L)	(M)	(N)
(O)	(P)	(Q)	(R)	(S)	(T)	(U)	(V)	(W)	(X)
(Y)	(Z)	(a)	(b)	(c)	(d)	(e)	(f)	(g)	(h)
(i)	(j)	(k)	(l)	(m)	(n)	(o)	(p)	(q)	(r)
(s)	(t)	(u)	(v)	(w)	(x)	(y)	(z)

38