Icom IC-A5 instruction manual Function display COM

Page 10

2 PANEL DESCRIPTION

■Function display (COM)

q w	e r t y u
	i
!1	o
�
	!0

q FUNCTION INDICATOR (p. 4)

Appears when is pushed.

w ANL INDICATOR (p. 4)

Appears while the ANL (Automatic Noise Limiter) function is in use.

e LOCK INDICATOR (p. 10)

➥Appears while the lock function is in use.

r DUPLEX INDICATOR (IC-A23 only) (p. 22)

➥“DUP” appears when the duplex function is activated in NAV mode.

➥“DUP” blinks while setting the duplex frequency.

t LOW BATTERY INDICATOR (p. 10)

➥Appears when the battery is nearing exhaustion. The at- tached battery pack requires recharging.

➥Appears and ﬂashes when battery replacement is nec-

essary.

y RECORD INDICATOR (p. 10)

➥”REC” blinks while the internal recorder is recording the signal.

u PLAY INDICATOR (p. 10)

➥“PLAY” appears during play back of the recorded signal.

iTAG CHANNEL INDICATOR (p. 17)

➥“TAG” appears when the memory channel is set as a TAG channel.

o MEMORY CHANNEL INDICATOR (p. 12)

➥Shows the memory channel number.

6

Image 10

Contents IA23 IA5 Word Definition RwarningSupplied Accessories Accessories included with the transceiver QtyTable of Contents Belt clip Accessory AttachmentAntenna Conveniently attaches to your beltRMIC/SP TANT Panel DescriptionPanel description UUP/DOWNAntenna Connector ANT PTT Switch PTT pTuning Dial Dial p Power Switch PWR3FUNCTION KEY F 1ANL KEY ANL REC2BANK KEY Bank Play 5ENTER KEY Entwx6DIGIT Keys Function display COM Function display COM/NAV 4COURSE Deviation Needles IC-A23 only pBasic Operation Setting a frequencyAccessing 121.5 MHz emer- gency frequency DIAL↔ Y/Z trade functionSide tone function Setting squelch levelSelecting a weather channel Beep toneLock function Low battery indicatorREC/PLAY the signals /messages Display backlightingReceiving When a signal is received on the set frequencyTransmitting Memory Operation Transferring memory contentsMemory channel selection Rotate the Dial to select the desired memory channel number Programming a memory channelPush , then push MR MW Example Programming WX-05* into memory BankMemory names Clearing memory contentsProgramming memory names ENT COM band scan Scan OperationScan types Memory scanWeather channel scan TAG channelsCDI Mode VOR indicatorsCOM Band Dvor Mode VOR Navigation IC-A23 onlyVOR functions To select CDI modeTo select Dvor mode ‘TO’ or ‘FROM’ ﬂag selectionFlying to a VOR station VOR Indicator NoteTo exit CDI mode, push , then 1 Dvor Magnetic north Aircraft is on CourseAircraft is OFF Course Crosschecking position Entering a desired courseAbss Function Crosschecking Position Programming a duplex frequency Duplex operationOperating the duplex function Battery pack charging Battery PacksCharging precautions Rapid charging with the BC-119Rapid charging with the BC-119 Regular charging Charging period 15 hoursBattery pack life About the battery packBattery pack Caution Operating periodCloning Cloning using PCCloning error Transceiver to transceiver cloningTroubleshooting Problem Possible Cause SolutionDTransmitter SpecificationsDGeneral DReceiverOptions Battery packsOther options IC-A23 PTT switchOPC-967 IC-A5Quick Reference Operation Guide Kamihigashi, Hirano-ku, Osaka 547-0002 Japan