12 OPERATION GUIDE
34
∀MEMORY
•Memory programming
qPush [CLR] to select the frequency mode or push [F], then push [ENT (WX)] to select WX CH* mode.
wSelect the desired frequency or WX CH*.
ePush [F], then push [MR (MW)] to enter memory programming mode.
• “M” blinks on the display.
rRotate [DIAL] to select a desired memory CH number.
• Push [BANK], then select the BANK number if desired. Push [BANK] to exit the BANK selection mode.
tPush [ENT] to program the memory contents.
•Transferring memory contents
qPush [MR] to enter memory mode.
wSelect the desired channel to be transferred.
ePush [F], then push [MR].
• BANK number and menory CH number disappears as frequency mode is automatically selected and the memory contents are transferred.
∀KEY LOCK FUNCTION (p. 8)
qPush [F],Then push [7 (KELOCK)] to turn the keylock function ON.
• “ 
” appears on the display.
wPush [F],Then push [7 (KELOCK)] to turn the keylock function ON.
∀SCAN (p. 14)
qPush [CLR], [MR] or [F], then [WX]* to select the frequency , memory or WX CH* mode.
wPush [F], then push [SQL (SCAN)] to start scanning.
•Decimal point blinks during scan- ning.
•Rotate the [DIAL] to change the scanning direction.
ePush [CLR] to cancel the scanning.
∀TAG CHANNELS (p. 13)
qPush [MR] to select the memory mode.
wPush [F], then [9 (TAG)] to turn the channel “TAG” ON and OFF.
*WX CH available U.S.A. version only.