Icom IC-A5 instruction manual Function display COM/NAV, 4COURSE Deviation Needles IC-A23 only p

Page 11

■Function display (COM/NAV)

�

!2 !3

!0MEMORY BANK NUMBER INDICATOR (p. 12) Shows the selected memory bank number.

!1FREQUENCY DISPLAY (p. 8)

➥Shows the operating frequency.

➥Shows the channel name when the memory name func- tion is selected.

!2COURSE INDICATORS (IC-A23 only) (p. 19)

➥Indicates where your aircraft is located on a VOR radial in DVOR mode.

➥Indicates where your desired course is located on a VOR radial in CDI mode.

PANEL DESCRIPTION 2

!3TO-FROM INDICATOR (IC-A23 only) (p. 19)

➥Indicates whether the VOR navigation information is based on a course leading to the VOR station or lead- ing away from the VOR station.

!4COURSE DEVIATION NEEDLES (IC-A23 only) (p. 22)

➥Indicates the deviation between the desired course and your actual ﬂying course every 2 degrees.

!5OVERFLOW INDICATOR (IC-A23 only) (p. 22)

➥Appears when the deviation between the desired course and ﬂying course is over 10 degrees.

Image 11

Contents IA23 IA5 Rwarning Word DefinitionAccessories included with the transceiver Qty Supplied AccessoriesTable of Contents Conveniently attaches to your belt Accessory AttachmentAntenna Belt clipUUP/DOWN Panel DescriptionPanel description RMIC/SP TANTPower Switch PWR PTT Switch PTT pTuning Dial Dial p Antenna Connector ANT5ENTER KEY Entwx 1ANL KEY ANL REC2BANK KEY Bank Play 3FUNCTION KEY F6DIGIT Keys Function display COM 4COURSE Deviation Needles IC-A23 only p Function display COM/NAVDIAL↔ Y/Z trade function Setting a frequencyAccessing 121.5 MHz emer- gency frequency Basic OperationBeep tone Setting squelch levelSelecting a weather channel Side tone functionDisplay backlighting Low battery indicatorREC/PLAY the signals /messages Lock functionTransmitting When a signal is received on the set frequencyReceiving Memory channel selection Transferring memory contentsMemory Operation Example Programming WX-05* into memory Bank Programming a memory channelPush , then push MR MW Rotate the Dial to select the desired memory channel numberProgramming memory names Clearing memory contentsMemory names ENT Memory scan Scan OperationScan types COM band scanTAG channels Weather channel scanVOR Navigation IC-A23 only VOR indicatorsCOM Band Dvor Mode CDI Mode‘TO’ or ‘FROM’ ﬂag selection To select CDI modeTo select Dvor mode VOR functionsTo exit CDI mode, push , then 1 Dvor VOR Indicator NoteFlying to a VOR station Aircraft is OFF Course Aircraft is on CourseMagnetic north Abss Function Entering a desired courseCrosschecking position Crosschecking Position Operating the duplex function Duplex operationProgramming a duplex frequency Rapid charging with the BC-119 Battery PacksCharging precautions Battery pack chargingCharging period 15 hours Rapid charging with the BC-119 Regular chargingOperating period About the battery packBattery pack Caution Battery pack lifeTransceiver to transceiver cloning Cloning using PCCloning error CloningProblem Possible Cause Solution TroubleshootingDReceiver SpecificationsDGeneral DTransmitterOther options Battery packsOptions IC-A5 PTT switchOPC-967 IC-A23Quick Reference Operation Guide Kamihigashi, Hirano-ku, Osaka 547-0002 Japan