Icom IC-A5 Transceiver to transceiver cloning, Cloning using PC, Cloning error

Page 32

8 CLONING

Cloning allows you to quickly and easily transfer the programmed data from one transceiver to another transceiver, or, data from PC to a transceiver using the optional CS-A23 cloning software.

DTransceiver to transceiver cloning

qConnect the OPC-474 CLONING CABLE with adapter plugs to the [SP/MIC] jack of the master and slave transceivers.

•The master transceiver is used to send data to the slave trans- ceiver.

wWhile push and holding [Y]

+ [Z],push [PWR] ON to enter cloning mode (for both the master transceiver and slave transceiver both.).

•“CLONE” appears and the transceivers enter the clone standby condition.

ePush [ENT] on the master

transceiver.

•“CL-OUT” appears in the master transceiver’s display. •“CL-IN” appears automati- cally in the slave trans- ceiver’s display.

rWhen cloning is ﬁnished, turn power OFF, then ON again to exit cloning mode.

NOTE: DO NOT transfer the data from IC-A23 to IC-A5, when the data contains the NAV band data. In such case, cloning error may occur.

Cloning using PC

Data can be cloned to and from a PC (IBM compatible) using the optional CS-A23 CLONING SOFTWARE and the optional OPC-478 CLONING CABLE. Consult the CS-A23 CLONING SOFTWARE HELP message for details.

DCloning error

NOTE: DO NOT push [ENT] on the slave transceiver dur- ing cloning. This will cause a cloning error.

When the display at right ap- pears, a cloning error has oc- curred.

In this case, both transceivers automatically return to the clone standby condition and cloning must be repeated.

28

Image 32

Contents IA23 IA5 Word Definition RwarningSupplied Accessories Accessories included with the transceiver QtyTable of Contents Accessory Attachment AntennaBelt clip Conveniently attaches to your beltPanel Description Panel descriptionRMIC/SP TANT UUP/DOWNPTT Switch PTT p Tuning Dial Dial pAntenna Connector ANT Power Switch PWR1ANL KEY ANL REC 2BANK KEY Bank Play3FUNCTION KEY F 5ENTER KEY Entwx6DIGIT Keys Function display COM Function display COM/NAV 4COURSE Deviation Needles IC-A23 only pSetting a frequency Accessing 121.5 MHz emer- gency frequencyBasic Operation DIAL↔ Y/Z trade functionSetting squelch level Selecting a weather channelSide tone function Beep toneLow battery indicator REC/PLAY the signals /messagesLock function Display backlightingTransmitting When a signal is received on the set frequencyReceiving Memory channel selection Transferring memory contentsMemory Operation Programming a memory channel Push , then push MR MWRotate the Dial to select the desired memory channel number Example Programming WX-05* into memory BankProgramming memory names Clearing memory contentsMemory names ENT Scan Operation Scan typesCOM band scan Memory scanWeather channel scan TAG channelsVOR indicators COM Band Dvor ModeCDI Mode VOR Navigation IC-A23 onlyTo select CDI mode To select Dvor modeVOR functions ‘TO’ or ‘FROM’ ﬂag selectionTo exit CDI mode, push , then 1 Dvor VOR Indicator NoteFlying to a VOR station Aircraft is OFF Course Aircraft is on CourseMagnetic north Abss Function Entering a desired courseCrosschecking position Crosschecking Position Operating the duplex function Duplex operationProgramming a duplex frequency Battery Packs Charging precautionsBattery pack charging Rapid charging with the BC-119Rapid charging with the BC-119 Regular charging Charging period 15 hoursAbout the battery pack Battery pack CautionBattery pack life Operating periodCloning using PC Cloning errorCloning Transceiver to transceiver cloningTroubleshooting Problem Possible Cause SolutionSpecifications DGeneralDTransmitter DReceiverOther options Battery packsOptions PTT switch OPC-967IC-A23 IC-A5Quick Reference Operation Guide Kamihigashi, Hirano-ku, Osaka 547-0002 Japan