Icom IC-A5 instruction manual Options, Battery packs, Other options

Page 35

DBattery packs

			Charging period
Battery					Operating
Battery	Voltage	Capacity	Wall	BC-119 or	Operating
pack			Wall	BC-121	period*1
			charger	BC-121
			charger	with AD-88
BP-200L	9.6 V	760 mAh	15 hrs	1.5 hrs	6 hrs

1Operating periods are calibrated for the following conditions: at 25°C (77°F), Tx (high power) : Rx : standby = 5 : 5 : 90

DOther options

BC-110AWALL CHARGER (same as supplied. Depends on version)

Used for regular charging of the connected battery pack.

BC-119DESKTOP CHARGER + AD-88CHARGER ADAPTOR For rapid charging of battery packs. An AC adapter is sup- plied with the charger. Some BC-119 versions require the AD- 87 additionally. Charging time: 1.5 to 2 hrs.

OPC-254LDC POWER CABLE

For operation and charging via an external power supply.

CP-12LCIGARETTE LIGHTER CABLE WITH NOISE FILTER

For operation and charging via a 12 V cigarette lighter socket.

OPTIONS 11

OPC-967HEADSET ADAPTER

When using an optional headset, such as those from the David Clark Co. via the adapter, the transceiver outputs your transmitted voice to the headset for monitoring. (p. 9)

CS-A23CLONING SOFTWARE

Provides quick and easy programming of items, including pri- vate channels, scan settings, etc., via an IBM® compatible PC to transceiver.

OPC-474CLONING CABLE

Cloning cable for transceiver to transceiver cloning.

OPC-478CLONING CABLE

Cloning cable for PC to transceiver cloning.

IBM® is a registered trademark of International Business Machines.

31

Image 35

Contents IA23 IA5 Rwarning Word DefinitionAccessories included with the transceiver Qty Supplied AccessoriesTable of Contents Conveniently attaches to your belt Accessory AttachmentAntenna Belt clipUUP/DOWN Panel DescriptionPanel description RMIC/SP TANTPower Switch PWR PTT Switch PTT pTuning Dial Dial p Antenna Connector ANT5ENTER KEY Entwx 1ANL KEY ANL REC2BANK KEY Bank Play 3FUNCTION KEY F6DIGIT Keys Function display COM 4COURSE Deviation Needles IC-A23 only p Function display COM/NAVDIAL↔ Y/Z trade function Setting a frequencyAccessing 121.5 MHz emer- gency frequency Basic OperationBeep tone Setting squelch levelSelecting a weather channel Side tone functionDisplay backlighting Low battery indicatorREC/PLAY the signals /messages Lock functionTransmitting When a signal is received on the set frequencyReceiving Memory channel selection Transferring memory contentsMemory Operation Example Programming WX-05* into memory Bank Programming a memory channelPush , then push MR MW Rotate the Dial to select the desired memory channel numberProgramming memory names Clearing memory contentsMemory names ENT Memory scan Scan OperationScan types COM band scanTAG channels Weather channel scanVOR Navigation IC-A23 only VOR indicatorsCOM Band Dvor Mode CDI Mode‘TO’ or ‘FROM’ ﬂag selection To select CDI modeTo select Dvor mode VOR functionsTo exit CDI mode, push , then 1 Dvor VOR Indicator NoteFlying to a VOR station Aircraft is OFF Course Aircraft is on CourseMagnetic north Abss Function Entering a desired courseCrosschecking position Crosschecking Position Operating the duplex function Duplex operationProgramming a duplex frequency Rapid charging with the BC-119 Battery PacksCharging precautions Battery pack chargingCharging period 15 hours Rapid charging with the BC-119 Regular chargingOperating period About the battery packBattery pack Caution Battery pack lifeTransceiver to transceiver cloning Cloning using PCCloning error CloningProblem Possible Cause Solution TroubleshootingDReceiver SpecificationsDGeneral DTransmitterOther options Battery packsOptions IC-A5 PTT switchOPC-967 IC-A23Quick Reference Operation Guide Kamihigashi, Hirano-ku, Osaka 547-0002 Japan