4 MEMORY OPERATION
■Memory names
ïProgramming memory names
The memory channel can display a
qRotate the [DIAL] to select the desired frequency in Fre- quency mode.
wPush 
, then push [MR].
eRotate the [DIAL] to select the desired memory channel to be programmed.
•Push [BANK] to select the BANK number if desired. Push [CLR] to exit the BANK selection mode.
rPush [MR] to enter the memory name programming mode.
•
tPush the appropriate digit key several times to select the desired character as listed at right.
•To erase a character, overwrite with a space (displayed as _).
•To move the cursor forwards or backwards, use [DIAL].
yPush [ENT] to program the name.
•Flashing stops.
•When no name is programmed, the display shows the operating frequency.
•To clear the entered comment, push [CLR] before pushing [ENT].
key | Character | key | Character | key | Character |
|
|
|
|
|
|
1 | 1, Q, Z | 2 | 2, A, B, C | 3 | 3, D, E, F |
|
|
|
|
|
|
4 | 4, G, H, I | 5 | 5, J, K, L | 6 | 6, M, N, O |
|
|
|
|
|
|
7 | 7, P, R, S | 8 | 8, T, U, V | 9 | 9, W, X, Y |
|
|
|
|
|
|
ENT | Program | 0 | 0, space – |
|
|
|
|
|
|
|
|
ïClearing memory contents
Unwanted memory channels can be cleared. Programming over a memory channel also clears the previously pro- grammed contents. Memory channel 1 cannot be cleared.
qSelect the memory channel to be cleared.
wPush 
, then push and hold [CLR] for 1 sec.
14