Icom IC-A5 instruction manual Supplied Accessories, Accessories included with the transceiver Qty

Page 3

etc. Therefore, be careful when carrying with, or placing near metal objects, carrying in handbags, etc.

DO NOT allow children to play with any radio equipment containing a transmitter.

DO NOT operate the transceiver near unshielded electrical blasting caps or in an explosive atmosphere.

AVOID using or placing the transceiver in direct sunlight or in areas with temperatures below –10°C (+14°F) or above +60°C (+140°F).

SUPPLIED ACCESSORIES

 

Accessories included with the transceiver:

Qty.

q Antenna

1

w Belt clip

1

e Handstrap

1

r Battery pack (BP-200L)*

1

t Wall charger*

1

• Carrying case (LC-147)*

1

• HEADSET ADAPTER (OPC-967)*

1

*The battery pack, wall charger, HEADSET ADAPTER or carry- ing case may differ depending on version. Some versions do not include a battery pack, wall charger, HEADSET ADAPTER or carrying case.

The use of non-Icom battery packs/chargers may impair transceiver performance and invalidate the warranty.

Even when the transceiver power is OFF, a slight current still flows in the circuits. Remove the battery pack or case from the transceiver when not using it for a long time. Otherwise, the battery pack or installed dry cell batteries will become ex- hausted.

q w

e

r

t

ii

Image 3
Contents IA23 IA5 Rwarning Word DefinitionAccessories included with the transceiver Qty Supplied AccessoriesTable of Contents Conveniently attaches to your belt Accessory AttachmentAntenna Belt clipUUP/DOWN Panel DescriptionPanel description RMIC/SP TANTPower Switch PWR PTT Switch PTT pTuning Dial Dial p Antenna Connector ANT5ENTER KEY Entwx 1ANL KEY ANL REC2BANK KEY Bank Play 3FUNCTION KEY F6DIGIT Keys Function display COM 4COURSE Deviation Needles IC-A23 only p Function display COM/NAVDIAL↔ Y/Z trade function Setting a frequencyAccessing 121.5 MHz emer- gency frequency Basic OperationBeep tone Setting squelch levelSelecting a weather channel Side tone functionDisplay backlighting Low battery indicatorREC/PLAY the signals /messages Lock functionWhen a signal is received on the set frequency ReceivingTransmitting Transferring memory contents Memory OperationMemory channel selection Example Programming WX-05* into memory Bank Programming a memory channelPush , then push MR MW Rotate the Dial to select the desired memory channel numberClearing memory contents Memory namesProgramming memory names ENT Memory scan Scan OperationScan types COM band scanTAG channels Weather channel scanVOR Navigation IC-A23 only VOR indicatorsCOM Band Dvor Mode CDI Mode‘TO’ or ‘FROM’ flag selection To select CDI modeTo select Dvor mode VOR functionsVOR Indicator Note Flying to a VOR stationTo exit CDI mode, push , then 1 Dvor Aircraft is on Course Magnetic northAircraft is OFF Course Entering a desired course Crosschecking positionAbss Function Crosschecking Position Duplex operation Programming a duplex frequencyOperating the duplex function Rapid charging with the BC-119 Battery PacksCharging precautions Battery pack chargingCharging period 15 hours Rapid charging with the BC-119 Regular chargingOperating period About the battery packBattery pack Caution Battery pack lifeTransceiver to transceiver cloning Cloning using PCCloning error CloningProblem Possible Cause Solution TroubleshootingDReceiver SpecificationsDGeneral DTransmitterBattery packs OptionsOther options IC-A5 PTT switchOPC-967 IC-A23Quick Reference Operation Guide Kamihigashi, Hirano-ku, Osaka 547-0002 Japan