Telex tr-200p operating instructions Specifications, Overall, Transmit

	SPECIFICATIONS
	Overall
Power Requirements	....................6 AA cells (Alkaline, NEDA, MN 1500)
	Nickel Cadmium Optional
Current Drain	typical 65 mA
Temperature Range	-4°F to 130°F (-20°C to 55°C)
Dimensions	4.25" W x 4.125" H x 2.0" D
	(108mm x 105mm x 51mm)
Weight	13 oz (369g) with batteries
Transmit Antenna	1/4-wave wire (attached)
Receive Antenna	1/4-wave wire (attached)

	Transmit
RF Frequency Range		150-216 MHz
RF Frequency Stability		Crystal Controlled, 0.005%
RF Power Output		50 mW Typical
Modulation		FM, 5000 Hz deviation,
	100 micro-seconds Pre-emphasis
Modulation Limiter		Internal Compressor
Modulation Frequency Range		300 to 5000 Hz +/-2 dB
Microphone Audio Input		30 to 3500 ohms
Microphone Input Sensitivity	2 mV Dynamic, 4 mV Electret
Radiated Harmonics and Spurious Emissions		................................-45 dBC,
		Exceeds FCC Specifications
FCC Acceptance	Type Accepted Under Parts 90 and 74

	Receive
RF Frequency Range	150-216 MHz
RF Frequency Stability	Crystal Controlled, 0.005%
Type	Dual Conversion Superheterodyne, FM
RF Sensitivity	Less than 0.5 ∝V for 12 dB SINAD
IF Selectivity	3 dB at 30 kHz (Ceramic Filter)
Image Rejection	70 dB or better
Squelch Quieting	90 dB
Squelch Threshold	3.0 ∝V (internal)
Signal-to-Noise Ratio	90 dB
Audio Output	32 mW into 600 ohms (Headset)
Distortion	Less than 1% at Rated Output

-6-