Once the duplication run is completed, the good copies will be ejected and you shall see the following screen:
PASS 7 FAIL | 0( 7) |
Waiting for | Blanks O |
-“PASS 7” indicates that you’ve just made 7 successful copies.
-“FAIL 0” indicates that you have no failure in this run.
-“7” indicates that you’ve successfully copied 7 copies so far.
Next, refill more blank media to continue making more copies, or you can press “<<” to terminate your project and go back to the main menu.
If you’ve specified a counter value for your project and your project is completed, you shall see the following screen:
21 Disc Copied Press OK to Finish
If you see above message, you can press “>>” to go back to main menu.
If you enabled the counter and the number of discs you have inserted is more than what you requested, you will receive a message regarding you have inserted more discs than what you need. You can continue to copy or you can eject the extras.
If you happen to have any failed discs (bad copy), the failed disc(s) will not be ejected automatically. You need to manually eject them and throw them away if they are write once recordable disc(s).
- 23 -