Tutorial Guide
VIII. Change the SETUP settings
Most of the internal settings and information is stored inside the SETUP menu. To explore and modify them is simple. Below is an example to modify the “Auto Start” setting. Please note that the default setup is set for optimal performance of the duplicator, it is unnecessary to change if you are satisfied with the outcome.
1.Use UP or DOWN arrow button to navigate to the following screen.
DUPLICATOR 1.00 12.Setup
2.Press “>>” to enter Setup Menu and you shall see the following:
Setup
1.Langua
3.Use UP or DOWN arrow button to navigate to the following screen.
Setup
2.Auto Start
4.Press “>>” to enter Auto Start Setting Menu and you shall see the following:
- 41 -