Primera Technology 061605-510800-(01) user manual Setup Guide Setup USB 2.0 / Firewire devices

Page 68

Setup Guide

I. Setup USB 2.0 / Firewire device(s)

(This only applies if you have USB 2.0 or Firewire connections installed)

•If there’s a switch next to the USB/Firewire Port:

1.Turn your duplicator off if it is running.

2.Turn your computer off if it is running.

3.Set the USB2.0/Firewire switch to “ON” at the back of your duplicator.

4.Using the standard USB 2.0/Firewire cable to connect your computer and your duplicator.

5.Turn on your duplicator.

6.Turn on your computer.

7.After that, your computer will recognize a number of external devices depend on the machine you purchased.

You need to reboot your duplicator every time you want to turn on/off the USB 2.0/Firewire Device(s).

•If there is NOT a switch next to the USB/Firewire Port:

1.Turn your duplicator on.

2.Go to “12. Setup”

3.Go to submenu “USB Connection” / “Firewire Connection”

4.Press UP or DOWN key to “ON”

5.Press (“>>”/Ent.) Key to submit your selection.

6.The duplicator will restart and the computer should detect an

external writer.

Every PC related product has compatibility issues. Even though the USB 2.0/ Firewire connection(s) have been thoroughly tested before the unit was shipped out of the factory, there’s still a slight chance that your PC/Mac computer is not compatible with the units USB 2.0/ Firewire connection. If that happens, please contact your PC/Mac manufacture for possible configuration changes to make it work or try it on another PC/Mac computer.

- 64 -

Image 68

Contents USER’S Manual Table of Content Setup Title Welcome Before you startSetup Ieee USB 2.0 / 1394 Firewire devices Your duplicator LCD Front Panel Drive 1 Port Pioneer DVD-ROM Tutorial Guide Make Disc-to-Disc CopiesSelect Source Start the Copy Process Introduction to Duplication ModeGo back to Copy Menu Specify Counter OK? Counter No CounterCounter Specify Counter Specify Counter OK? Preparing Waiting for Master Waiting for Blanks Preparing Disc Detected, Go?Copying .. MB OR0 12% 481MB Processing Please WaitCopying .. MB 21 12% 481MB Pass 7 Fail Page How to make copies from the Hard Drive? Make sure the Master Reading Source is set to the Hard Drive Hard Drive PortLoad Partition 4 Load-New Partition Hard Drive Setup Select PartitionHard Drive Setup Load Partition Edit Partition Name 10% 423MB LoadLoading Load Partition OK Press OK to Continue Choose PartitionCounter Specify Counter Specify Counter OK? Preparing Waiting for Blanks Copying ... H4012MB 21 12% 481MB Copying ... H4012MB 12% 481MBPass 7 Fail Tutorial Guide III. Select the Duplication Speed Navigate to Speed Selection MenuEnter Speed Selection Menu Select Burn Speed DVD to DVDSelect Duplication Speed Type Select Desired Duplication SpeedDVD to DVD Speed Adjusted to DVD to DVD SpeedTutorial Guide Select the Master Reading Source Enter Source Selection Menu Navigate to Source Selection MenuDuplicator 1.00 8.Select Source Select Desired Master Reading Device Drive 1 Port SelectedTutorial Guide Load Master Disc onto the Hard Drive Hard Drive Port 0 WDC WD400EB-75CPF0 Load your master disc onto the Hard Drive Edit Partition Name FUN Loading Hard Drive Setup Rename Partition Tutorial Guide VI. Rename Existing Hard Drive Partition NameNow, you can rename the partition you’ve just selected Enter HDD Image Name FUNxThen, you will be directed back to Hard Drive Setup Menu Partition FUN2 RenamedHard Drive Setup Delete Partition Partition FUN Deleted Tutorial Guide VIII. Change the Setup settings Duplicator 1.00 12.SetupPress to enter Setup Menu and you shall see the following Setup LanguaAuto Start Tutorial Guide IX. Audio CD Editing Going to the Edit Audio Track menu Edit Track To Blank CDTotal 0 Trk 0m 0s Track 1 4m31s Once you made your selection, you shall see the followingPreparing Waiting for Master Waiting for a Blank Total 6 Trk 26m17s Finish Editing? Total 6 Trk 26m17s Are you done?Audio Editing Finalizing Please Wait Total 6 Trk 26m17s Insert Next Master?Total 6 Trk 26m17s Confirm to Finalize? Job Completed Press OK to Finish Total 0 Trk 0m00s Track 1 4m03s Total 1 Trk 4m49s Track 2 4m49sTotal 2 Trk 9m47s Track 4 4m58s Total 2 Trk 9m47s Are you done?Total 2 Trk 9m47s Finish Editing? Total 2 Trk 9m47s Insert Next Master?Total 2 Trk 9m47s Track 1 4m03s Total 3 Trk 14m35s Track 3 4m47sTotal 5 Trk 24m29s Track 5 4m27s Total 5 Trk 24m29s Are you done?Audio Editing 4m47s Total 5 Trk 24m29s Finish Editing?Job Completed Press OK to Finish Tutorial Guide Introduction to Account Management Feature Manage Accounts Enter Admin’s PWDCopy Manage Accounts View User There are five menus in the Manage AccountsManage Accounts Create User Manage Accounts Edit User InfoManage Accounts Password on Bootup Manage Accounts Delete UserTutorial Guide XI. Introduction to Duplication Mode On the Fly Load and CopyPress UP or Down Button Consecutively until you see Tutorial Guide XII. Using Autocopy Duplicator 1.00 15.AutoCopy Copying .. MB 12% 481MBPass 7 Fail If there is not a switch next to the USB/Firewire Port Setup Guide Setup USB 2.0 / Firewire devicesIf there’s a switch next to the USB/Firewire Port Menu Overview DriveHDD-to-Disc CopiesTest + Copy Language Auto StartMax Audio, VCD & CDG Speed Read Error SkipCD Writing Mode Duplication Mode Introduction to Duplication Mode CounterBuzzer Startup Menu12.11 DVD+R High Compatibility Mode Disable DrivesIsrc Utility Disc InfoDevice Info Load DefaultSystem Info Update Firmware Using Autocopy ShutdownSave Account ManagementCopy completed but the copies are not readable / executable? Utility Failure rate is highUtility Disc Info Utility Load DefaultLoad Default Press OK to continue Error Code Blank media you’ve inserted does not