Primera Technology 061605-510800-(01) user manual Pass 7 Fail

Page 67

-“4012MB” indicates the capacity of the master disc.

-“481MB” indicates the current progress of the duplication in terms of MB

-“12%” indicates the current progress of the duplication.

-“0” indicates that you have made 0 copies so far.

It is normal to see the progress indicator stays at 0- 10% and 100% for approximately 30 seconds for CD duplication and up to 1 minute for DVD duplication. That is caused by the initializing and finalizing stage.

6.Once the duplication run is completed, the successful copies will be ejected and you shall see the following screen:

PASS 7 FAIL	0( 7)
Waiting for	Blanks O

-“PASS 7” indicates that you’ve just made 7 successful copies.

-“FAIL 0” indicates that you have no failure in this run.

-“7” indicates that you’ve successfully copied 7 copies so

far.

Next, refill your Blank Discs to continue making more copies. If you wish to copy a new Master Disc, you will need to remove the old master and load the new master discs prior to loading any new blank discs into the writer trays.

If you have a failed disc(s) (bad copy), the failed disc(s) will not be ejected automatically. You need to manually eject the disc(s) and discard it if it’s a write once recordable disc(s).

- 63 -

Image 67

Contents USER’S Manual Table of Content Setup Title Before you start WelcomeSetup Ieee USB 2.0 / 1394 Firewire devices Your duplicator LCD Front Panel Select Source Tutorial Guide Make Disc-to-Disc CopiesDrive 1 Port Pioneer DVD-ROM Go back to Copy Menu Introduction to Duplication ModeStart the Copy Process Counter Specify Counter Counter No CounterSpecify Counter OK? Specify Counter OK? Preparing Disc Detected, Go? Preparing Waiting for Master Waiting for BlanksCopying .. MB 21 12% 481MB Processing Please WaitCopying .. MB OR0 12% 481MB Pass 7 Fail Page How to make copies from the Hard Drive? Hard Drive Port Make sure the Master Reading Source is set to the Hard DriveHard Drive Setup Load Partition Hard Drive Setup Select PartitionLoad Partition 4 Load-New Partition Edit Partition Name Loading Load10% 423MB Choose Partition Load Partition OK Press OK to ContinueCounter Specify Counter Specify Counter OK? Preparing Waiting for Blanks Copying ... H4012MB 12% 481MB Copying ... H4012MB 21 12% 481MBPass 7 Fail Navigate to Speed Selection Menu Tutorial Guide III. Select the Duplication SpeedSelect Desired Duplication Speed Enter Speed Selection MenuSelect Burn Speed DVD to DVD Select Duplication Speed TypeDVD to DVD Speed DVD to DVD Speed Adjusted toTutorial Guide Select the Master Reading Source Duplicator 1.00 8.Select Source Navigate to Source Selection MenuEnter Source Selection Menu Drive 1 Port Selected Select Desired Master Reading DeviceTutorial Guide Load Master Disc onto the Hard Drive Hard Drive Port 0 WDC WD400EB-75CPF0 Load your master disc onto the Hard Drive Edit Partition Name FUN Loading Tutorial Guide VI. Rename Existing Hard Drive Partition Name Hard Drive Setup Rename PartitionEnter HDD Image Name FUNx Now, you can rename the partition you’ve just selectedPartition FUN2 Renamed Then, you will be directed back to Hard Drive Setup MenuHard Drive Setup Delete Partition Partition FUN Deleted Setup Langua Tutorial Guide VIII. Change the Setup settingsDuplicator 1.00 12.Setup Press to enter Setup Menu and you shall see the followingAuto Start Tutorial Guide IX. Audio CD Editing Edit Track To Blank CD Going to the Edit Audio Track menuPreparing Waiting for Master Waiting for a Blank Once you made your selection, you shall see the followingTotal 0 Trk 0m 0s Track 1 4m31s Audio Editing Total 6 Trk 26m17s Are you done?Total 6 Trk 26m17s Finish Editing? Total 6 Trk 26m17s Confirm to Finalize? Total 6 Trk 26m17s Insert Next Master?Finalizing Please Wait Job Completed Press OK to Finish Total 2 Trk 9m47s Are you done? Total 0 Trk 0m00s Track 1 4m03sTotal 1 Trk 4m49s Track 2 4m49s Total 2 Trk 9m47s Track 4 4m58sTotal 3 Trk 14m35s Track 3 4m47s Total 2 Trk 9m47s Finish Editing?Total 2 Trk 9m47s Insert Next Master? Total 2 Trk 9m47s Track 1 4m03sTotal 5 Trk 24m29s Finish Editing? Total 5 Trk 24m29s Track 5 4m27sTotal 5 Trk 24m29s Are you done? Audio Editing 4m47sJob Completed Press OK to Finish Tutorial Guide Introduction to Account Management Feature Copy Enter Admin’s PWDManage Accounts There are five menus in the Manage Accounts Manage Accounts View UserManage Accounts Edit User Info Manage Accounts Create UserManage Accounts Delete User Manage Accounts Password on BootupTutorial Guide XI. Introduction to Duplication Mode Load and Copy On the FlyPress UP or Down Button Consecutively until you see Tutorial Guide XII. Using Autocopy Copying .. MB 12% 481MB Duplicator 1.00 15.AutoCopyPass 7 Fail If there’s a switch next to the USB/Firewire Port Setup Guide Setup USB 2.0 / Firewire devicesIf there is not a switch next to the USB/Firewire Port DriveHDD-to-Disc Copies Menu OverviewTest + Copy Auto Start LanguageCD Writing Mode Read Error SkipMax Audio, VCD & CDG Speed Startup Menu Duplication ModeIntroduction to Duplication Mode Counter BuzzerUtility Disc Info 12.11 DVD+R High Compatibility ModeDisable Drives IsrcSystem Info Load DefaultDevice Info Account Management Update FirmwareUsing Autocopy Shutdown SaveCopy completed but the copies are not readable / executable? Failure rate is high UtilityLoad Default Press OK to continue Utility Load DefaultUtility Disc Info Error Code Blank media you’ve inserted does not