Primera Technology 061605-510800-(01) user manual

Page 77

Trouble Shooting

1.No display on LCD or the unit does not operate when the power is on.

Check the connection of power cable and the environment of power outlet is normal.

Make sure the power voltage matches the voltage of your power outlet.

If the duplicator was stored in a location where the temperature dropped below 32°F (0°C) within the past 24 hours, leave the duplicator in a warm room with temperatures at least 65°F

(19°C) for 4 hours prior to powering it on.

2.READER cannot read disc.

Check the format of the master CD/DVD or the master CD/DVD itself for damage.

Your master disc may be copy protected. Normally, most of the DVD and some of the CD you have purchase from stores have been copy protected.

Use the Writers to read your master disc by selecting one of writers as the Master Reading Source (Please refer to “Tutorial IV – Select the Master Reading Source”); if it works, make a copy of your master disc and treat the copy as the new master. Then set the Master Reading Source back to the READER and

try again.

3.Buttons do not function.

Maybe it is still busy on a task. Give it sometime and press it again. If it still doesn’t work, turn off the machine, and then

restart the machine after a minute.

4.Copy completed but the copies are not readable / executable?

Use “compare” feature to check the copied disc.

Based on our experience, the quality of your media plays a big role on this part. Try to use high quality media to prevent such problems.

Please use another DVD/CD player/ROM to test the copied media. Sometimes, your DVD/CD Player/ROM may not be compatible with recordable DVD/CD disc.

- 73 -

Image 77

Contents USER’S Manual Table of Content Setup Title Before you start WelcomeSetup Ieee USB 2.0 / 1394 Firewire devices Your duplicator LCD Front Panel Drive 1 Port Pioneer DVD-ROM Tutorial Guide Make Disc-to-Disc CopiesSelect Source Start the Copy Process Introduction to Duplication ModeGo back to Copy Menu Specify Counter OK? Counter No CounterCounter Specify Counter Specify Counter OK? Preparing Disc Detected, Go? Preparing Waiting for Master Waiting for BlanksCopying .. MB OR0 12% 481MB Processing Please WaitCopying .. MB 21 12% 481MB Pass 7 Fail Page How to make copies from the Hard Drive? Hard Drive Port Make sure the Master Reading Source is set to the Hard DriveLoad Partition 4 Load-New Partition Hard Drive Setup Select PartitionHard Drive Setup Load Partition Edit Partition Name 10% 423MB LoadLoading Choose Partition Load Partition OK Press OK to ContinueCounter Specify Counter Specify Counter OK? Preparing Waiting for Blanks Copying ... H4012MB 12% 481MB Copying ... H4012MB 21 12% 481MBPass 7 Fail Navigate to Speed Selection Menu Tutorial Guide III. Select the Duplication SpeedSelect Burn Speed DVD to DVD Enter Speed Selection MenuSelect Duplication Speed Type Select Desired Duplication SpeedDVD to DVD Speed DVD to DVD Speed Adjusted toTutorial Guide Select the Master Reading Source Enter Source Selection Menu Navigate to Source Selection MenuDuplicator 1.00 8.Select Source Drive 1 Port Selected Select Desired Master Reading DeviceTutorial Guide Load Master Disc onto the Hard Drive Hard Drive Port 0 WDC WD400EB-75CPF0 Load your master disc onto the Hard Drive Edit Partition Name FUN Loading Tutorial Guide VI. Rename Existing Hard Drive Partition Name Hard Drive Setup Rename PartitionEnter HDD Image Name FUNx Now, you can rename the partition you’ve just selectedPartition FUN2 Renamed Then, you will be directed back to Hard Drive Setup MenuHard Drive Setup Delete Partition Partition FUN Deleted Duplicator 1.00 12.Setup Tutorial Guide VIII. Change the Setup settingsPress to enter Setup Menu and you shall see the following Setup LanguaAuto Start Tutorial Guide IX. Audio CD Editing Edit Track To Blank CD Going to the Edit Audio Track menuTotal 0 Trk 0m 0s Track 1 4m31s Once you made your selection, you shall see the followingPreparing Waiting for Master Waiting for a Blank Total 6 Trk 26m17s Finish Editing? Total 6 Trk 26m17s Are you done?Audio Editing Finalizing Please Wait Total 6 Trk 26m17s Insert Next Master?Total 6 Trk 26m17s Confirm to Finalize? Job Completed Press OK to Finish Total 1 Trk 4m49s Track 2 4m49s Total 0 Trk 0m00s Track 1 4m03sTotal 2 Trk 9m47s Track 4 4m58s Total 2 Trk 9m47s Are you done?Total 2 Trk 9m47s Insert Next Master? Total 2 Trk 9m47s Finish Editing?Total 2 Trk 9m47s Track 1 4m03s Total 3 Trk 14m35s Track 3 4m47sTotal 5 Trk 24m29s Are you done? Total 5 Trk 24m29s Track 5 4m27sAudio Editing 4m47s Total 5 Trk 24m29s Finish Editing?Job Completed Press OK to Finish Tutorial Guide Introduction to Account Management Feature Manage Accounts Enter Admin’s PWDCopy There are five menus in the Manage Accounts Manage Accounts View UserManage Accounts Edit User Info Manage Accounts Create UserManage Accounts Delete User Manage Accounts Password on BootupTutorial Guide XI. Introduction to Duplication Mode Load and Copy On the FlyPress UP or Down Button Consecutively until you see Tutorial Guide XII. Using Autocopy Copying .. MB 12% 481MB Duplicator 1.00 15.AutoCopyPass 7 Fail If there is not a switch next to the USB/Firewire Port Setup Guide Setup USB 2.0 / Firewire devicesIf there’s a switch next to the USB/Firewire Port DriveHDD-to-Disc Copies Menu OverviewTest + Copy Auto Start LanguageMax Audio, VCD & CDG Speed Read Error SkipCD Writing Mode Introduction to Duplication Mode Counter Duplication ModeBuzzer Startup MenuDisable Drives 12.11 DVD+R High Compatibility ModeIsrc Utility Disc InfoDevice Info Load DefaultSystem Info Using Autocopy Shutdown Update FirmwareSave Account ManagementCopy completed but the copies are not readable / executable? Failure rate is high UtilityUtility Disc Info Utility Load DefaultLoad Default Press OK to continue Error Code Blank media you’ve inserted does not