Tutorial Guide:
I.Make Disc-to-Disc Copies
This process will copy your master disc into several blank discs simultaneously. However, due to its simultaneous nature, a good conditioned master disc and lower recording speed is necessary for high success rate and good quality duplications.
When you turn on your duplicator, after it has booted up, you should see the following signifying your duplicator is ready.
DUPLICATOR 1.00
1.COPY
1.Make sure the Master Reading Source is set to the 1st Tray (Reading Tray).
It is very important to make sure that your current Master Reading Source is the top tray in order to avoid unnecessary error messages. To check the Master Reading Source, please do the following:
a. Use UP or DOWN arrow buttons to navigate to the following screen.
DUPLICATOR 1.00
8.Select Source
b. Press “>>” to enter Select Source Menu and you shall see the following:
Drive 1 Port 1.0
Pioneer DVD-ROM
- 5 -