LSI AP1172-E1 Rackmount Command, Module, Battery, Controller Fan, Power Supply, DB-9 Minihub

Command Module Site Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Area Requirements

The floor space at the installation site must provide enough strength to support the weight of the command module and associated equipment, sufficient space to install, operate, and service the command module, and sufficient ventilation to provide a free flow of air to the unit.

Weights

The total weight of the command module depends on the number of components installed Refer to Table 2-1, Table 2-2, and Table 2-3for more information.

Table 2-1 E4400 Command Module Weight

	Maximum1		Empty Unit3
Unit	Unit Weight	Shipping2	Unit Weight	Shipping2
		Weight		Weight
Rackmount Command	43.99 kg (97.0 lb)	57.2 kg (125.9 lb)	16.1 kg (35.8 lb)	30.8 kg (67.8 lb)
Module
Battery	9.7 kg (21.4 lb)	11.8 kg (26.0 lb)
Controller	3.0 kg (6.6 lb)	5.0 kg (11.0 lb)
Controller Fan	0.9 kg (1.9 lb)	2.3 kg (5.0 lb)
Power Supply	1.5 kg (3.3 lb)	2.9 kg (6.5 lb)	Not applicable.
Fan Communications	1.84 kg (4.06 lb)	2.46 kg (5.44 lb)
Module
GBIC Minihub	0.567 kg (1.25 lb)	0.712 kg (1.57 lb)
DB-9 Minihub	0.567 kg (1.25 lb)	0.712 kg (1.57 lb)

1Maximum weight equals a command module with all canisters installed (fully loaded).

2Shipping weight equals the empty or maximum weight of the command module, plus all shipping materials.

3Empty weight equals a command module with all canisters removed.

2-2 Command Module and Drive Module Site Preparation Guide