LSI AP1172-E1 manual Ladder Cords, Cabinet Ladder Cord

72-Inch Cabinet Site Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Ladder Cords

Each AC power distribution box outlet supports one ladder cord (Figure 1-5) that you can connect to a maximum of six modules. You may connect up to twelve 220/230 VAC modules to each AC power distribution box for a maximum of twenty-four power attachments inside the cabinet.

Although the cabinet may not be fully populated when shipped, the cabinet is shipped with two ladder cords. Each cord has the following specifications:

•

•

•

•

•

Cord – 10 A per cord (1.67 A per connection if all are used)

Input Connector – IEC 320, C-19, 16 A, 250 VAC

Plugs – IEC 320, C-14, 10 A, 250 VAC

Ladder Step – 5.25 inches between connections

Cord Routing – Route cords between the mounting rails and side skins of cabinet

Figure 1-5 Cabinet Ladder Cord

1-10 Command Module and Drive Module Site Preparation Guide