SUPER MICRO Computer S120T, SERIES3800 user manual General Safety Precautions

Page 30

SERIES3800/S120T (7045A-C3/7045A-CT) User's Manual

Serverboard Battery: CAUTION - There is a danger of explosion if the onboard battery is installed upside down, which will reverse its polarities (see Figure 4-1). This battery must be replaced only with the same or an equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions.

CD-ROM Laser: CAUTION - this server may have come equipped with a CD- ROM drive. To prevent direct exposure to the laser beam and hazardous radia- tion exposure, do not open the enclosure or use the unit in any unconventional way.

Mainboard replaceable soldered-in fuses: Self-resetting PTC (Positive Tempera- ture Coefficient) fuses on the mainboard must be replaced by trained service technicians only. The new fuse must be the same or equivalent as the one replaced. Contact technical support for details and support.

4-2 General Safety Precautions

!

Follow these rules to ensure general safety:

Keep the area around the SERIES3800/S120T (7045A-C3/7045A-CT) clean and free of clutter.

The 7045A-C3/7045A-CT weighs approximately 64 lbs (29.1 kg.) when fully loaded. When lifting the system, two people at either end should lift slowly with their feet spread out to distribute the weight. Always keep your back straight and lift with your legs. Don't use the handles (if installed) to lift the chassis; the handles should only be used to pull the server out of the rack.

Place the chassis top cover and any system components that have been re- moved away from the system or on a table so that they won't accidentally be stepped on.

While working on the system, do not wear loose clothing such as neckties and unbuttoned shirt sleeves, which can come into contact with electrical circuits or be pulled into a cooling fan.

Remove any jewelry or metal objects from your body, which are excellent metal conductors that can create short circuits and harm you if they come into contact with printed circuit boards or areas where power is present.

4-2

Image 30
Contents SERIES3800/S120T Manual Revision Release Date February 15 Manual Organization Server InstallationAbout This Manual IntroductionAdvanced Chassis Setup System SafetyAdvanced Serverboard Setup BiosPreface Table of Contents System Interface Bios Chapter Introduction OverviewOnboard SAS Serverboard FeaturesProcessors Memory Serial ATAServer Chassis Features Backplane Cooling SystemIntel 5100 Chipset System Block Diagram Europe Contacting SupermicroHeadquarters Asia-PacificChapter Server Installation Preparing for SetupUnpacking the System Choosing a Setup Location Rack PrecautionsServer Precautions Ambient Operating Temperature Rack Mounting ConsiderationsInstalling the System into a Rack Identifying the Sections of the Rack RailsInstalling the Chassis Rails Preparing to Install the Chassis RailsInstalling the Rack Rails Installing the Rails to the ChassisInstalling the Server into the Rack Installing the Server into a RackChecking the Serverboard Setup Accessing the Inside of the SystemChecking the Drive Bay Setup Checking the DrivesChecking the Airflow Chapter System Interface PowerReset Control Panel ButtonsControl Panel LEDs Overheat/Fan FailPower Fail Drive Carrier LEDsPage Chapter System Safety Electrical Safety PrecautionsGeneral Safety Precautions ESD Precautions Operating Precautions Installing the Onboard BatteryChapter Advanced Serverboard Setup Installing to the Chassis Serverboard InstallationConnecting Cables UnpackingConnecting Data Cables Connecting Power CablesConnecting the Control Panel Control Panel Header Pins I/O PortsInstalling the Processor and Heat Sink Installation ProcedureCPU Installation Gold dot Socket key Installing the Heat Sink Installation Uninstalling the Heat SinkInstalling Memory Installing Memory ModulesMemory Support Dimm Installation Installing an Add-on Card Adding PCI CardsServerboard Details X7DCA-3/X7DCA-i Layout Not drawn to scaleJumper Description Default Setting Connector DescriptionX7DCA-3/X7DCA-i Quick Reference Secondary Power Connectors Connector DefinitionsMain ATX Power Supply Connector Processor Power ConnectorReset Connector Power Fail LEDOverheat/Fan Fail LED OH Power On LED NMI ButtonFan Headers Wake-On-Ring Chassis IntrusionWake-On-LAN LAN1/2 Ethernet PortsUniversal Serial Bus USB Power LED/SpeakerOverheat LED/Fan Fail JOH1 Sgpio HeadersSAS Power SMB I2C Connector Power SMB I2C ConnectorBackpanel Power SMB I2C Connector ATX PS/2 Keyboard and PS/2 Mouse PortsCD Header Front Panel Audio ControlCmos Clear Jumper SettingsExplanation of Jumpers To clear CmosI2C Bus to PCI-X/ Slots LAN1/2 Enable/DisableWatch Dog Enable/Disable I2C Bus to PCI-Exp. SlotsLAN1/2 LEDs Onboard IndicatorsOnboard Power LED LE1 SAS LEDsParallel, Floppy, IDE, and Sata Ports Parallel Printer PortIDE Connector Sata PortsFloppy Drive Connector Chapter Advanced Chassis Setup Chassis Front View Front Control Panel PowerPower Fail NIC1Fan Failure Installing a New FanSystem Fans Replacing Chassis Cooling FansRemoving a Chassis Fan Drive Bay Installation Installing/Removing SAS/SATA DrivesMounting a SAS/SATA drive in a Drive Carrier SAS/SATA Backplane Removing a SAS/SATA Drive CarrierAdding a DVD/CD-ROM Drive Installing Components in the 5.25 Drive BaysRemoving the Empty Drive Bay Adding an IDE or Floppy DrivePower Supply Power Supply FailureReplacing the Power Supply Page Starting the Setup Utility System BiosHow To Change the Configuration Data IntroductionDefault settings are in bold text unless otherwise noted Running SetupMain Bios Setup Press the Delete key to enter SetupSystem Time Main Bios Setup Menu Main Setup FeaturesBios Date System DateType Ultra DMA Mode LBA Mode ControlTransfer Mode CHS Format Available for Primary/Master onlySata Ahci Available when Sata RAID is Disabled Native Mode OperationSerial ATA Sata RAID Enable Serial ATAQuickBoot Mode Advanced SetupXBoot Features QuietBootXMemory Cache Cache Extended Memory Cache Base 0-512KCache Base 512K-640K Discrete Mtrr AllocationXpci Configuration XAdvanced Chipset Control XAdvanced Processor Options Hardware Prefetcher Available when supported by the CPU Intel Eist Support Available when supported by the CPUEcho TPR Xcpu Cache Control XI/O Device ConfigurationDMA Channel Xdmi Event LoggingParallel Port Floppy Disk ControllerXConsole Redirection XHardware Monitor Logic Voltage Monitoring System Event LoggingClear System Event Logging XSystem Event Log/System Event Log List Mode XRealtime Sensor Data Set Supervisor Password Supervisor Password IsUser Password Is SecuritySet User Password Password on BootBoot Boot Priority Order/Excluded from Boot OrdersExit Monitor type does not match Cmos Run Setup Keyboard errorKeyboard locked Unlock key switch System battery is dead Replace and run SetupReal time clock error System Cmos checksum bad Default configuration usedSystem timer error Check date and time settingsEntering Setup Fail-Safe Timer NMI FailedAllocation Error for device Eisa Cmos not writeableDevice IRQ conflict PS/2 Mouse Boot Summary ScreenPress F1 to resume, F2 to Setup, F3 for previous Nnnn kB Extended RAM PassedVideo Bios shadowed Press F2 to enter SetupSystem Bios shadowed PS/2 MousePage Recoverable Post Errors Terminal Post ErrorsPost Code Description Post Code Description Post Code Description Post Code Description Appendix B Bios Post Codes Page Introduction to the Intel ICH9R Serial RAID Setup Introduction to Serial ATA and Parallel ATASerial ATA Sata RAID Configurations Intel Matrix StorageUsing the Intel ICH9R Sata RAID Utility Program Creating, Deleting and Resetting RAID VolumesCreating a RAID 0 Volume Creating a RAID 1 Volume Creating a RAID 10 RAID 1+ RAID Creating a RAID 5 Set Parity Deleting RAID Volume Resetting to Non-RAID and Resetting a RAID HDD Exiting the Intel Matrix Storage Manager UtilityInstalling Windows XP/2000/2003 for RAID Systems Bios Weight Regulatory Compliance