SUPER MICRO Computer SERIES3800, S120T Chassis Intrusion, Wake-On-LAN, Wake-On-Ring, Serial Ports

Page 49

Chapter 5: Advanced Serverboard Setup

Chassis Intrusion

The Chassis Intrusion header is des- ignated JL1. Attach an appropriate cable from the chassis to inform you of a chassis intrusion when the chas- sis is opened

Wake-On-LAN

The Wake-On-LAN header is des- ignated JWOL1 on the serverboard. See the table on the right for pin deﬁnitions. You must also have a LAN card with a Wake-On-LAN connector and cable to use this feature.

Wake-On-Ring

The Wake-On-Ring header is desig- nated JWOR1. This function allows your computer to receive and be "awakened" by an incoming call when in the suspend state. See the table on the right for pin deﬁnitions. You must also have a WOR card and cable to use this feature.

LAN1/2 (Ethernet Ports)

Two Ethernet ports (designated LAN1 and LAN2) are located beside the VGA port on the I/O backplane. These ports accept RJ45 type cables.

Chassis Intrusion

Pin Deﬁnitions (JL1)

Pin# Deﬁnition

1Intrusion Input

2Ground

Wake-On-LAN

Pin Deﬁnitions

(JWOL1)

Pin# Deﬁnition

1+5V Standby

2Ground

3Wake-up

Wake-On-Ring

Pin Deﬁnitions

(JWOR1)

Pin# Deﬁnition

1Ground (Black)

2Wake-up

Serial Port Pin Deﬁnitions

(COM1/COM2)

Serial Ports

Two serial ports (COM1 and COM2) are included on the I/O backplane. See the table on the right for pin deﬁnitions.

Pin # Deﬁnition

1DCD

2RXD

3TXD

4DTR

5Ground

Pin # Deﬁnition

6DSR

7RTS

8CTS

9RI

10NC

5-17

Image 49

Contents SERIES3800/S120T Manual Revision Release Date February 15 About This Manual Server InstallationManual Organization IntroductionAdvanced Serverboard Setup System SafetyAdvanced Chassis Setup BiosPreface Table of Contents System Interface Bios Overview Chapter IntroductionProcessors Memory Serverboard FeaturesOnboard SAS Serial ATAServer Chassis Features Cooling System BackplaneIntel 5100 Chipset System Block Diagram Headquarters Contacting SupermicroEurope Asia-PaciﬁcPreparing for Setup Chapter Server InstallationUnpacking the System Rack Precautions Choosing a Setup LocationServer Precautions Rack Mounting Considerations Ambient Operating TemperatureIdentifying the Sections of the Rack Rails Installing the System into a RackPreparing to Install the Chassis Rails Installing the Chassis RailsInstalling the Rails to the Chassis Installing the Rack RailsInstalling the Server into a Rack Installing the Server into the RackAccessing the Inside of the System Checking the Serverboard SetupChecking the Drives Checking the Drive Bay SetupChecking the Airﬂow Reset PowerChapter System Interface Control Panel ButtonsOverheat/Fan Fail Control Panel LEDsDrive Carrier LEDs Power FailPage Electrical Safety Precautions Chapter System SafetyGeneral Safety Precautions ESD Precautions Installing the Onboard Battery Operating PrecautionsChapter Advanced Serverboard Setup Connecting Cables Serverboard InstallationInstalling to the Chassis UnpackingConnecting Power Cables Connecting Data CablesConnecting the Control Panel I/O Ports Control Panel Header PinsInstallation Procedure Installing the Processor and Heat SinkCPU Installation Gold dot Socket key Uninstalling the Heat Sink Installing the Heat Sink InstallationInstalling Memory Modules Installing MemoryMemory Support Dimm Installation Adding PCI Cards Installing an Add-on CardX7DCA-3/X7DCA-i Layout Not drawn to scale Serverboard DetailsConnector Description Jumper Description Default SettingX7DCA-3/X7DCA-i Quick Reference Main ATX Power Supply Connector Connector DeﬁnitionsSecondary Power Connectors Processor Power ConnectorPower Fail LED Reset ConnectorOverheat/Fan Fail LED OH NMI Button Power On LEDFan Headers Wake-On-LAN Chassis IntrusionWake-On-Ring LAN1/2 Ethernet PortsOverheat LED/Fan Fail JOH1 Power LED/SpeakerUniversal Serial Bus USB Sgpio HeadersBackpanel Power SMB I2C Connector Power SMB I2C ConnectorSAS Power SMB I2C Connector ATX PS/2 Keyboard and PS/2 Mouse PortsFront Panel Audio Control CD HeaderExplanation of Jumpers Jumper SettingsCmos Clear To clear CmosWatch Dog Enable/Disable LAN1/2 Enable/DisableI2C Bus to PCI-X/ Slots I2C Bus to PCI-Exp. SlotsOnboard Power LED LE1 Onboard IndicatorsLAN1/2 LEDs SAS LEDsParallel Printer Port Parallel, Floppy, IDE, and Sata PortsSata Ports IDE ConnectorFloppy Drive Connector Chapter Advanced Chassis Setup Chassis Front View Power Fail PowerFront Control Panel NIC1System Fans Installing a New FanFan Failure Replacing Chassis Cooling FansRemoving a Chassis Fan Installing/Removing SAS/SATA Drives Drive Bay InstallationMounting a SAS/SATA drive in a Drive Carrier Removing a SAS/SATA Drive Carrier SAS/SATA BackplaneRemoving the Empty Drive Bay Installing Components in the 5.25 Drive BaysAdding a DVD/CD-ROM Drive Adding an IDE or Floppy DrivePower Supply Failure Power SupplyReplacing the Power Supply Page How To Change the Conﬁguration Data System BiosStarting the Setup Utility IntroductionMain Bios Setup Running SetupDefault settings are in bold text unless otherwise noted Press the Delete key to enter SetupBios Date Main Bios Setup Menu Main Setup FeaturesSystem Time System DateType Transfer Mode LBA Mode ControlUltra DMA Mode CHS Format Available for Primary/Master onlySerial ATA Sata RAID Enable Native Mode OperationSata Ahci Available when Sata RAID is Disabled Serial ATAXBoot Features Advanced SetupQuickBoot Mode QuietBootXMemory Cache Cache Base 512K-640K Cache Base 0-512KCache Extended Memory Discrete Mtrr AllocationXpci Conﬁguration XAdvanced Chipset Control XAdvanced Processor Options Intel Eist Support Available when supported by the CPU Hardware Prefetcher Available when supported by the CPUEcho TPR XI/O Device Conﬁguration Xcpu Cache ControlParallel Port Xdmi Event LoggingDMA Channel Floppy Disk ControllerXConsole Redirection XHardware Monitor Logic System Event Logging Voltage MonitoringClear System Event Logging XSystem Event Log/System Event Log List Mode XRealtime Sensor Data User Password Is Supervisor Password IsSet Supervisor Password SecurityPassword on Boot Set User PasswordBoot Priority Order/Excluded from Boot Orders BootExit Keyboard locked Unlock key switch Keyboard errorMonitor type does not match Cmos Run Setup System battery is dead Replace and run SetupSystem timer error System Cmos checksum bad Default conﬁguration usedReal time clock error Check date and time settingsAllocation Error for device Fail-Safe Timer NMI FailedEntering Setup Eisa Cmos not writeablePress F1 to resume, F2 to Setup, F3 for previous PS/2 Mouse Boot Summary ScreenDevice IRQ conﬂict Nnnn kB Extended RAM PassedSystem Bios shadowed Press F2 to enter SetupVideo Bios shadowed PS/2 MousePage Terminal Post Errors Recoverable Post ErrorsPost Code Description Post Code Description Post Code Description Post Code Description Appendix B Bios Post Codes Page Introduction to Serial ATA and Parallel ATA Introduction to the Intel ICH9R Serial RAID SetupSerial ATA Sata Intel Matrix Storage RAID ConﬁgurationsCreating, Deleting and Resetting RAID Volumes Using the Intel ICH9R Sata RAID Utility ProgramCreating a RAID 0 Volume Creating a RAID 1 Volume Creating a RAID 10 RAID 1+ RAID Creating a RAID 5 Set Parity Deleting RAID Volume Exiting the Intel Matrix Storage Manager Utility Resetting to Non-RAID and Resetting a RAID HDDInstalling Windows XP/2000/2003 for RAID Systems Bios Weight Regulatory Compliance