![](/images/new-backgrounds/1293666/293666143x1.webp)
SERIES3800/S120T
XIDE Primary Master/Slave, IDE Secondary Master/Slave,
SATA Port3, SATA Port4 and Ext. Primary Master/Slave
These settings allow the user to set the parameters of IDE Primary Master/Slave, IDE Secondary Master/Slave, SATA Port 3, SATA Port 4 and Ext. Primary Master/ Slave. Hit <Enter> to activate the following
Type
This option allows the user to select the type of IDE hard drive. The option Auto will allow the BIOS to automatically configure the parameters of the HDD installed at the connection. Enter a number between 1 to 39 to select a predetermined HDD type. Select User to allow the user to enter the parameters of the HDD installed. Select CDROM if a CDROM drive is installed. Select ATAPI if a removable disk drive is installed.