SUPER MICRO Computer S120T Native Mode Operation, Serial ATA Sata RAID Enable, System Memory

Page 74

SERIES3800/S120T (7045A-C3/7045A-CT) User's Manual

Serial ATA

This setting allows the user to enable or disable the Serial ATA function. The options are Disabled and Enabled.

Native Mode Operation

Select the native mode for ATA. The options are Parallel ATA, Serial ATA, Both and Auto.

Serial ATA (SATA) RAID Enable

Select Enable to enable Serial ATA RAID Functions. (For a Windows OS environ- ment, use the RAID driver if this feature is set to Enabled. If this item is set to Disabled, the item SATA AHCI Enable will be available.) The options are Enabled

and Disabled.

ICH RAID Code Base (Available when SATA RAID is Enabled)

Select Intel to enable Intel's SATA RAID ﬁrmware. Select LSI to use LSI's HostRAID ﬁrmware. The options are Intel and LSI.

SATA AHCI (Available when SATA RAID is Disabled)

Select Enable to enable the function of Serial ATA Advanced Host Interface. (Use caution when enabling this function. This feature is for advanced programmers only.) The options are Enabled and Disabled.

System Memory

This display informs you how much system memory is recognized as being present in the system.

Extended Memory

This display informs you how much extended memory is recognized as being pres- ent in the system.

7-6

Image 74

Contents SERIES3800/S120T Manual Revision Release Date February 15 Manual Organization Server InstallationAbout This Manual IntroductionAdvanced Chassis Setup System SafetyAdvanced Serverboard Setup BiosPreface Table of Contents System Interface Bios Chapter Introduction OverviewOnboard SAS Serverboard FeaturesProcessors Memory Serial ATAServer Chassis Features Backplane Cooling SystemIntel 5100 Chipset System Block Diagram Europe Contacting SupermicroHeadquarters Asia-PaciﬁcUnpacking the System Chapter Server InstallationPreparing for Setup Server Precautions Choosing a Setup LocationRack Precautions Ambient Operating Temperature Rack Mounting ConsiderationsInstalling the System into a Rack Identifying the Sections of the Rack RailsInstalling the Chassis Rails Preparing to Install the Chassis RailsInstalling the Rack Rails Installing the Rails to the ChassisInstalling the Server into the Rack Installing the Server into a RackChecking the Serverboard Setup Accessing the Inside of the SystemChecking the Drive Bay Setup Checking the DrivesChecking the Airﬂow Chapter System Interface PowerReset Control Panel ButtonsControl Panel LEDs Overheat/Fan FailPower Fail Drive Carrier LEDsPage Chapter System Safety Electrical Safety PrecautionsGeneral Safety Precautions ESD Precautions Operating Precautions Installing the Onboard BatteryChapter Advanced Serverboard Setup Installing to the Chassis Serverboard InstallationConnecting Cables UnpackingConnecting the Control Panel Connecting Data CablesConnecting Power Cables Control Panel Header Pins I/O PortsInstalling the Processor and Heat Sink Installation ProcedureCPU Installation Gold dot Socket key Installing the Heat Sink Installation Uninstalling the Heat SinkMemory Support Installing MemoryInstalling Memory Modules Dimm Installation Installing an Add-on Card Adding PCI CardsServerboard Details X7DCA-3/X7DCA-i Layout Not drawn to scaleX7DCA-3/X7DCA-i Quick Reference Jumper Description Default SettingConnector Description Secondary Power Connectors Connector DeﬁnitionsMain ATX Power Supply Connector Processor Power ConnectorOverheat/Fan Fail LED OH Reset ConnectorPower Fail LED Fan Headers Power On LEDNMI Button Wake-On-Ring Chassis IntrusionWake-On-LAN LAN1/2 Ethernet PortsUniversal Serial Bus USB Power LED/SpeakerOverheat LED/Fan Fail JOH1 Sgpio HeadersSAS Power SMB I2C Connector Power SMB I2C ConnectorBackpanel Power SMB I2C Connector ATX PS/2 Keyboard and PS/2 Mouse PortsCD Header Front Panel Audio ControlCmos Clear Jumper SettingsExplanation of Jumpers To clear CmosI2C Bus to PCI-X/ Slots LAN1/2 Enable/DisableWatch Dog Enable/Disable I2C Bus to PCI-Exp. SlotsLAN1/2 LEDs Onboard IndicatorsOnboard Power LED LE1 SAS LEDsParallel, Floppy, IDE, and Sata Ports Parallel Printer PortIDE Connector Sata PortsFloppy Drive Connector Chapter Advanced Chassis Setup Chassis Front View Front Control Panel PowerPower Fail NIC1Fan Failure Installing a New FanSystem Fans Replacing Chassis Cooling FansRemoving a Chassis Fan Mounting a SAS/SATA drive in a Drive Carrier Drive Bay InstallationInstalling/Removing SAS/SATA Drives SAS/SATA Backplane Removing a SAS/SATA Drive CarrierAdding a DVD/CD-ROM Drive Installing Components in the 5.25 Drive BaysRemoving the Empty Drive Bay Adding an IDE or Floppy DriveReplacing the Power Supply Power SupplyPower Supply Failure Page Starting the Setup Utility System BiosHow To Change the Conﬁguration Data IntroductionDefault settings are in bold text unless otherwise noted Running SetupMain Bios Setup Press the Delete key to enter Setup System Time Main Bios Setup Menu Main Setup Features Bios Date System DateType Ultra DMA Mode LBA Mode ControlTransfer Mode CHS Format Available for Primary/Master onlySata Ahci Available when Sata RAID is Disabled Native Mode OperationSerial ATA Sata RAID Enable Serial ATAQuickBoot Mode Advanced SetupXBoot Features QuietBootXMemory Cache Cache Extended Memory Cache Base 0-512KCache Base 512K-640K Discrete Mtrr AllocationXpci Conﬁguration XAdvanced Chipset Control XAdvanced Processor Options Echo TPR Hardware Prefetcher Available when supported by the CPUIntel Eist Support Available when supported by the CPU Xcpu Cache Control XI/O Device ConﬁgurationDMA Channel Xdmi Event LoggingParallel Port Floppy Disk ControllerXConsole Redirection XHardware Monitor Logic Clear System Event Logging Voltage MonitoringSystem Event Logging XSystem Event Log/System Event Log List Mode XRealtime Sensor Data Set Supervisor Password Supervisor Password IsUser Password Is SecuritySet User Password Password on BootBoot Boot Priority Order/Excluded from Boot OrdersExit Monitor type does not match Cmos Run Setup Keyboard errorKeyboard locked Unlock key switch System battery is dead Replace and run SetupReal time clock error System Cmos checksum bad Default conﬁguration usedSystem timer error Check date and time settingsEntering Setup Fail-Safe Timer NMI FailedAllocation Error for device Eisa Cmos not writeableDevice IRQ conﬂict PS/2 Mouse Boot Summary ScreenPress F1 to resume, F2 to Setup, F3 for previous Nnnn kB Extended RAM PassedVideo Bios shadowed Press F2 to enter SetupSystem Bios shadowed PS/2 MousePage Post Code Description Recoverable Post ErrorsTerminal Post Errors Post Code Description Post Code Description Post Code Description Appendix B Bios Post Codes Page Serial ATA Sata Introduction to the Intel ICH9R Serial RAID SetupIntroduction to Serial ATA and Parallel ATA RAID Conﬁgurations Intel Matrix StorageUsing the Intel ICH9R Sata RAID Utility Program Creating, Deleting and Resetting RAID VolumesCreating a RAID 0 Volume Creating a RAID 1 Volume Creating a RAID 10 RAID 1+ RAID Creating a RAID 5 Set Parity Deleting RAID Volume Resetting to Non-RAID and Resetting a RAID HDD Exiting the Intel Matrix Storage Manager UtilityInstalling Windows XP/2000/2003 for RAID Systems Bios Weight Regulatory Compliance