
Chapter 6: Advanced Chassis Setup
6-5 Power Supply
The SERIES3800/S120T
The power supply has an
Power Supply Failure
If the power supply unit fails, the system will shut down and you will need to replace the power supply unit. Replace with the same model -
Replacing the Power Supply
1.First power down the server.
2.Unplug the power cord from the power supply module.
3.Remove the screws that secure the module to the chassis then pull it com- pletely out.
4.Replace the failed unit with another unit of the exact same part number
5.Gently but firmly push the new unit all the way into the open bay.
6.Secure it to the chassis using the screws you previously removed.
7.Finish by replacing the chassis left/top cover and then plugging the power cord back into the new module you just added.
8.Push the power button to restart the system.