Turning on the power
Before turning on the power 1, Ensure that all peripheral
devices are connected
# Power cord properly.
2, Remove the lens cover.
POWER | INPUT | $ |
|
| |
VIDEO | RGB |
|
AUTO |
| & |
MENU |
| |
SETUP |
| |
|
| |
ENTER |
| ( |
|
| ) |
FREEZE | SHUTTER | * |
STD |
|
|
VOLUME | D.ZOOM |
|
INDEX |
|
|
WINDOW |
|
|
PROJECTOR
'
Lens cover
Power indicator
#Connectsocket. the accessory power cord to the AC IN
BThe power indicator on the projector will illuminate red.
$Press the POWER button.
BThe power indicator on the projector will flash green. After a short period, the indicator will illuminate green, and a picture will be projected.
%Turn on the power of all connected devices.
BStart the play function of a device such as a DVD player.
NOTE:
BIf the power cord was disconnected during projection when the projector was used the last time, projection will start after the power cord is connected (when “POWER MEMORY” in the “OPTION2” menu is set to “ON”). Refer to page 44 for details.
BA tinkling sound may be heard when the lamp unit is turned on, but this is not a sign of a malfunction.
&Press the input select button to select the input signal.
Input select | VIDEO | RGB | |
buttons | |||
|
|
Changing | RGB |
|
|
|
| VIDEO |
| VIDEO |
|
| |||
|
|
|
| ||||||||||
signals |
|
|
|
|
|
|
|
|
|
|
|
| RGB |
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| |||||||
BA picture will be projected in accordance with the selected input signal.
BWhen a YPBPR signal is being input, “YPBPR” will be displayed instead of “RGB”.
Follow the procedure below when you set the projector up first, and when you change the setup place.
'Adjusting the angle
BWhile pressing the adjuster buttons, adjust the forward/back angle of tilt of the projector. Adjust so that the projector is as vertical to the screen as possible.
(Press the AUTO SETUP button to initiate automatic positioning.
BThe tilt of the projector and the input |
| |
signal will be detected and keystone |
| |
distortion and the position of the | AUTO SETUP | |
image will be corrected. | ||
| ||
(Refer to page 26 for details.) |
|
)Adjusting the size
BTurn the zoom ring to adjust the size of the projected image.
*Adjusting the focus
BTurn the focus ring to adjust the focus of the projected image.
Basic Operation
