LAMP RUNTIME
This setting displays the usage time for the lamp unit which is currently
CONTROL KEY
CONTROL KEY | ON |
| [ |
Setting up the security function
This projector is equipped with a security function. A password input screen can be displayed, or a company URL can be set up and displayed at the bottom of the projected image.
being used. When replacing the lamp unit, follow the instructions on page 51, and reset “LAMP RUNTIME” to “0”.
NOTE:
BThe lamp’s operating life varies depending on the usage conditions (such as the “LAMP POWER” setting and the number of times the power is turned on and off).
FUNC 1
FUNC1INDEX
[
KEYSTONE
This assigns a function to the FUNC1 button of the
INDEX
Functions in the same way as the INDEX WINDOW button on the accessory card remote control unit. (page 29)
KEYSTONE
Functions in the same way as when “KEYSTONE” is selected from the “MAIN MENU”. (page 34)
OFF |
To disable the buttons on the projector, set “CONTROL KEY” to “OFF”. A confirmation screen will then be displayed. Select “OK” by using I or H button. To use the buttons on the projector, set to “ON” by using the remote control unit.
AUTO POW.OFF
If no signal is input to the projector for the duration of the period you set, the projector will return to standby mode. The period can be set from 15 minutes to 60 minutes in 5 minute intervals. If you don't use this feature, set it to “DISABLE”. This feature will not function when using the “FREEZE” function.
POWER MEMORY
POWER MEMORY | ON |
| [ |
| OFF |
This sets the projector’s start up status for when the power cord is connected.
ON
The projector will start from the same status as when the power cord was disconnected. If the power cord was disconnected during projection when the projector was used the last time, projection will start after the power cord is connected.
OFF
The projector will be in standby mode.
Press the F or G button on the projector or remote control unit to select “SECURITY”, then press the ENTER button.
MENU
KEYSTONE
PICTURE
POSITION
INDEX WINDOW
SHUTTER
VOLUME
LANGUAGE
OPTION1
OPTION2
SECURITY
SELECT ENTER EXIT
PASSWORD |
|
OK | RETURN |
(When you use the “SECURITY” function for the first time)
Press the F, H, G, I, F, H, G and I buttons in order, then press the ENTER button.
(When a password change has been made before)
Type in the changed password, then press the ENTER button.
| SECURITY |
|
INPUT | PASSWD | OFF |
AMEND | PASSWD |
|
TEXT | DISPLAY | ON |
TEXT | CHANGE |
|
SELECT ADJ | RETRN |
INPUT PASSWD
The password input screen can be displayed when the power is turned on. All of the controls other than the POWER button are disabled unless the password is entered correctly.
ON
“INPUT PASSWD” is enabled.
OFF
“INPUT PASSWD” is disabled. The password input screen will not be displayed when the power is turned on.
AMEND PASSWD
Passwords can be changed. Press the ENTER button to display the “AMEND PASSWD” screen.
AMEND PASSWD
NEW
CONFIRM
OK RETURN
#Set a password by pressing the F,G,I, and H buttons.
(A maximum of 8 buttons can be set.)
$Press the ENTER button.
%Enter the password again for confirmation.
&Press the ENTER button. Password change will be completed.
Adjustments and settings